Browsing by Author 沈君洋

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:  
Showing results 1 to 20 of 108  next >
DateTitleAuthor(s)File
200613X-分子篩填充床吸附過程之模擬沈君洋; Shen-Chun Yang; 蘇衍祥; Hsiang, Su-Yen-
20086061鋁合金真空硬銲接合面之機械性能與氣密性吳威德; 陳石法; 沈君洋; 廖盛如; Liao, Sheng-Ju; 中興大學-
2006Analysis and Testing of an Adsorption-Type Refrigeration System with Plate-Fin Inserts in Packed Beds沈君洋; 行政院國家科學委員會; 中興大學機械工程系-
2014Computer Analysis of Heat Transfer Enhancement due to Ring-Type Ribs in Circular Tubes.沈君洋; 蔡維屏; TSAI WEI PING; 機械工程學系所
2014Dependence of heat transfer and pressure drop on arc diameter of internal ring-type ribs in circular tube沈君洋; 龔育威; Yu-Wei Gong; 機械工程學系所
2015Effects of Prandtl Number and Rib Shape on Heat Transfer Enhancement in Circular Tubes with Internal Ring-Type ProtrusionsJung-Yang San; 沈君洋; 黃文傑; Wen-Chieh Huang; 機械工程學系所
2004EVA/LDPE混合塑料與純LDPE塑料之薄件射出成型品之機械性能沈君洋; Jung-Yang San; 梁凱勝; Liang, Kai-Sheng-
2014Heat transfer enhancement of circular tube inserted with spring coil沈君洋; 陳誠安; Cheng-An Chen; 機械工程學系所
2003LDPE/EVA塑膠瓶嘴之射出成型條件與成型品薄壁處之拉伸性能測試沈君洋; 黃文彬-
2013LNG冷能利用於氫氣液化之可行性分析沈君洋; Jung-Yang San; 陸紀文; Chi-Wun Lu; 盧昭暉; Jau-Huai; 李奇勳; Lee, Ci-Syun; 中興大學-
2008PCB散熱層面積與散熱銅柱對於QFN封裝散熱特性之影響沈君洋; 黃柏文; 盧昭暉; 呂保儒; Lu, Bau-Ru; 中興大學-
2005Performance Analysis and Testing of a Methanol-Activated Carbon Adsorption Refrigerator沈君洋; 行政院國家科學委員會; 中興大學機械工程系-
2014Performance improvement on an evaporator in a four-bed adsorption heat pumpJung-Yang San; 沈君洋; 邱建翰; Chien-Han Chiu; 機械工程學系所
2010Performance of a Multi-Bed Adsoprtion Heat Pump for Operating at Unequal Mode Times in a Cycle沈君洋; 行政院國家科學委員會; 國立中興大學機械工程學系(所)-
2009Performance of a multi-bed adsorption heat pump using SWS-1L composite adsorbent and water as the working pairSan, J.Y.; 沈君洋; Hsu, H.C.-
2009Performance of a serpentine heat exchanger: Part I - Effectiveness and heat transfer characteristicsSan, J.Y.; 沈君洋; Lin, G.S.; Pai, K.L.-
2009Performance of a serpentine heat exchanger: Part II - Second-law efficiencySan, J.Y.; 沈君洋; Pai, K.L.-
Nov-2008PET保特瓶拉伸吹氣製程中熱模具之熱傳分析吳建興; 沈君洋; 工學院-
2007PET塑料之結晶模式之改良與其拉伸成型品之熱處理吳宗明; 黃榮祥; 方輝爐; 沈君洋; Jung-Yang San; 廖承毅; Liao, Cheng-Yi; 中興大學-
2004PP瓶胚之射出成型冷卻速率對結晶度之影響沈君洋; Jung-Yang San; 陳賦宜; Chen, Fu-Yi-