Browsing by Author Jung-Yang San

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:  
Showing results 1 to 20 of 30  next >
DateTitleAuthor(s)File
2015Effects of Prandtl Number and Rib Shape on Heat Transfer Enhancement in Circular Tubes with Internal Ring-Type ProtrusionsJung-Yang San; 沈君洋; 黃文傑; Wen-Chieh Huang; 機械工程學系所-
2004EVA/LDPE混合塑料與純LDPE塑料之薄件射出成型品之機械性能沈君洋; Jung-Yang San; 梁凱勝; Liang, Kai-Sheng-
2013LNG冷能利用於氫氣液化之可行性分析沈君洋; Jung-Yang San; 陸紀文; Chi-Wun Lu; 盧昭暉; Jau-Huai; 李奇勳; Lee, Ci-Syun; 中興大學-
2014Performance improvement on an evaporator in a four-bed adsorption heat pumpJung-Yang San; 沈君洋; 邱建翰; Chien-Han Chiu; 機械工程學系所-
2007PET塑料之結晶模式之改良與其拉伸成型品之熱處理吳宗明; 黃榮祥; 方輝爐; 沈君洋; Jung-Yang San; 廖承毅; Liao, Cheng-Yi; 中興大學-
2004PP瓶胚之射出成型冷卻速率對結晶度之影響沈君洋; Jung-Yang San; 陳賦宜; Chen, Fu-Yi-
2012一個渦捲式熱交換器之熱效率與有效功回收效率陳石法; Shih-Fa Chen; 盧 昭 暉; Jau-Huai Lu; 沈君洋; Jung-Yang San; 阮德勸; Khuyen, Nguyen Duc; 中興大學-
2005一種塑膠射出成型使用之小澆口熱澆道元件之熱傳分析沈君洋; Jung-Yang San; 陳又誠; Chen, Yu-Cheng-
2001保特瓶二段式製程中吹氣模具之逆向熱傳分析沈 君 洋; Jung-Yang San; 吳建興; Wu, Chien-Hsing-
2001保特瓶二段式製程中瓶胚模具之冷卻沈 君 洋; Jung-Yang San; 陳建銘; Chen, Chien-Ming-
2013兩支沸騰蒸發熱傳增強管之性能比較駱文傑; Wen-Jie Luo; 陳石法; Shi-Fa Chen; 沈君洋; Jung-Yang San; 黃正杰; Huang, Cheng-Chieh; 中興大學-
2000具面板多孔噴氣流中噴泉效應與干擾現象對熱傳之影響沈君洋; Jung-Yang San; 賴茂德-
2011再生型迴轉式空氣預熱器熱傳特性的數值研究沈君洋; Jung-Yang San; 李志良; 李亦堅; Chi-Liang Lee; I-Chien Lee; 盧昭暉; Jau-Huai Lu; 顧宏基; Ku, Hong -Chi; 中興大學-
2001再生後填充床冷卻對雙塔式吸附除濕系統性能之影響沈君洋; Jung-Yang San; 詹清龍; Jan, Chin-Lon-
2007吸附配對之特性對熱泵性能之影響黃溪泉; 陳石法; 沈君洋; Jung-Yang San; 林瑋旻; Lin, Wei-Min; 中興大學-
2004吹氣拉伸成形PET寶特瓶退火結晶過程之電腦模擬分析沈 君 洋; Jung-Yang San; 游家欣; You, Jia-Shin-
2005噴氣面板之長度與寬度對單孔垂直衝擊噴氣流熱傳紐塞數之影響沈君洋; Jung-Yang San; 蕭文政; Shiao, Wen-Jeng-
1999固態吸附劑之吸附理論模式之比較沈君洋; Jung-Yang San; 洪智堯; Hung, Francois-
2004圓管內部突出環節之熱傳增強沈君洋; Jung-Yang San; 黃文傑; Huang, Wen-Chieh-
2005圓管內部連續突出環節對水流與管壁間之熱傳增強沈君洋; Jung-Yang San; 王培堂; Wang, Pei-Tang-