Browsing by Author Uan, J.Y.

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:  
Showing results 1 to 20 of 35  next >
DateTitleAuthor(s)File
2009Alloying modification of Sn-Ag-Cu solders by manganese and titaniumLin, L.W.; 汪俊延; Song, J.M.; Lai, Y.S.; Chiu, Y.T.; Lee, N.C.; Uan, J.Y.-
2010Applications of carbonic acid solution for developing conversion coatings on Mg alloyYu, B.L.; 汪俊延; Lin, J.K.; Uan, J.Y.-
2008Characterization and improvement in the corrosion performance of a hot-chamber diecast Mg alloy thin plate by the removal of interdendritic phases at the die chill layerUan, J.Y.; 汪俊延; Li, C.F.; Yu, B.L.-
2004Characterization of gallium-induced intergranular fracture surface and the Auger electron spectroscopic analysis for mg grain boundary segregation in AA6061 T4 Al-Mg-Si alloyUan, J.Y.; 汪俊延; Chang, C.C.-
2007Characterization of Mg,Al-hydrotalcite conversion film on Mg alloy and Cl- and CO32- anion-exchangeability of the film in a corrosive environmentLin, J.K.; 汪俊延; Hsia, C.L.; Uan, J.Y.-
2007Converting hcp Mg-Al-Zn alloy into bcc Mg-Li-Al-Zn alloy by electrolytic deposition and diffusion of reduced lithium atoms in a molten salt electrolyte LiCl-KClLin, M.C.; 汪俊延; Tsai, C.Y.; Uan, J.Y.-
2005Correlating the microstructure of the die-chill skin and the corrosion properties for a hot-chamber die-cast AZ91D magnesium alloyYu, B.L.; 汪俊延; Uan, J.Y.-
2010Direct growth of oriented Mg-Al layered double hydroxide film on Mg alloy in aqueous HCO3-/CO32- solutionUan, J.Y.; Lin, J.K.; Tung, Y.S.-
2008Ductile-to-brittle transition for the aluminum alloy contacting to liquid gallium metalChang, C.C.; 汪俊延; Uan, J.Y.-
2006Effect of cooling rate on Mg17Al12 volume fraction and compositional inhomogeneity in a sand-cast AZ91D magnesium plateCho, C.Y.; 汪俊延; Uan, J.Y.; Tsai, T.C.-
2012Effects of concentrations of NaCl and organic acid on generation of hydrogen from magnesium metal scrapYu, S.H.; Uan, J.Y.; Hsu, T.L.-
2009Electrochemical behaviour and corrosion performance of Mg-Li-Al-Zn anodes with high Al compositionLin, M.C.; 汪俊延; Tsai, C.Y.; Uan, J.Y.-
2010Enhancement of corrosion resistance of Mg-9 wt.% Al-1 wt.% Zn alloy by a calcite (CaCO3) conversion hard coatingYu, B.L.; Pan, X.L.; Uan, J.Y.-
2005Evaluation of a new hydrogen generating system: Ni-rich magnesium alloy catalyzed by platinum wire in sodium chloride solutionCho, C.Y.; 汪俊延; Wang, K.H.; Uan, J.Y.-
2009Evolution of hydrogen from magnesium alloy scraps in citric acid-added seawater without catalystUan, J.Y.; 汪俊延; Yu, S.H.; Lin, M.C.; Chen, L.F.; Lin, H.I.-
2009Formation of Mg,Al-hydrotalcite conversion coating on Mg alloy in aqueous HCO3-/CO32- and corresponding protection against corrosion by the coatingLin, J.K.; Uan, J.Y.-
2006Gallium-induced magnesium enrichment on grain boundary and the gallium effect on degradation of tensile properties of aluminum alloysUan, J.Y.; 汪俊延; Chang, C.C.-
2007Generation of hydrogen from magnesium alloy scraps catalyzed by platinum-coated titanium net in NaCl aqueous solutionUan, J.Y.; 汪俊延; Cho, C.Y.; Liu, K.T.-
2009Investigation of the photo-catalytic coating on AZ91 alloyWang, J.Y.; 汪俊延; Tsai, H.J.; Uan, J.Y.; Wong, M.S.; Wu, S.K.-
2010Mechanical characterization of friction stir spot microweldsWang, D.A.; 王東安; Chao, C.W.; Lin, P.C.; Uan, J.Y.; 汪俊延-