機械工程學系所 類別首頁 | 全文筆數/總筆數 :258/2394

http://www.me.nchu.edu.tw/

瀏覽
如果您想要每天收到這個類別的更改,請點擊「訂閱」 RSS Feed RSS Feed RSS Feed
類別內的文件 (依上傳日期由降冪排序排序): 從 1 到 20 筆,總共 2394 筆
 下一步 >
日期標題作者全文
15-十二月-2015Transport phenomena and the effects of reactor geometry for epitaxial GaN growth in a vertical MOCVD reactorChien-Fu Tseng; Tsung-Yen Tsai; Yen-Hsiu Huang; Ming-Tsang Lee; Ray-Hua Horng
十一月-2015Experimental study and analysis of porous thin plate drying in a convection dryerAbdoul Karim Sekone; Yu-Yung Hung; Chih-Ting Yeh; Ming-Tsang Lee
八月-2015A novel flat polymer heat pipe with thermal via for cooling electronic devicesKai-Shing Yang; Tsung-Yi Yang; Cheng-Wei Tu; Chih-Ting Yeh; Ming-Tsang Lee
九月-2015Thermodynamic analysis of dry reforming of CH4 with CO2 at high pressuresR.Y. Chein; Y.C. Chen; C.T. Yu; J.N. Chung
1-二月-2015Sweep gas flow effect on membrane reactor performance for hydrogen production from high-temperature water-gas shift reactionR.Y. Chein; Y.C. Chen; J.N. Chung
6-七月-2015Modeling and simulation of H2S effect in high-temperature wateregas shift reaction using coal-derived syngasR.Y. Chein; Y.C. Chen b; C.T. Yu; J.N. Chung
二月-2015Diagnostics of gear deterioration using EEMD approach and PCA processC.Y. Yang; T.Y. Wu
九月-2015Gap ratio effect on flow characteristics behind side-by-side cylinders of diameter ratio twoFei-Long Song; Sen-Yun Tseng; Sun-Wen Hsu; Cheng-Hsiung Kuo
2015Manufacturing and Characterization of a Thermoelectric Energy Harvester Using the CMOS-MEMS TechnologyShih-Wen Peng; Po-Jen Shih; Ching-Liang Dai
2015Fabrication of a Micromachined Capacitive Switch Using the CMOS-MEMS TechnologyCheng-Yang Lin; Cheng-Chih Hsu; Ching-Liang Dai
2015Fabrication and Characterization of a Micro Methanol Sensor Using the CMOS-MEMS TechniqueFong, Chien-Fu; Dai, Ching-Liang; Wu, Chyan-Chyi-
2015Ethanol microsensors with a readout circuit manufactured using the CMOS-MEMS techniqueYang, Ming-Zhi; Dai, Ching-Liang-
2013Study on Preparation of Core-Shell Type Metal Composite Bulk by Using Extrusion范光堯; 彭立翰; Li-Han Peng; 機械工程學系所
2014Study on Applying Dieless Drawing to Form the End of Metal Wire范光堯; 王俊凱; Chun-Kai Wang; 機械工程學系所
2015Vibration-based Bearing Failure Monitoring based on the Time-Frequency Transform Method陳政雄; 鄭允睿; Yun-Jui Cheng; 機械工程學系所
2014Design and Fabrication of Uniform Temperature Chamber for Integrated Circuits Testing Application戴慶良; 方新傑; Hsin-Chieh Fang; 機械工程學系所
2014Application of Acoustic Emission Signals for Surface Roughness of Zirconia Ceramic in the Precision GrindingPai-Chung Tseng; 曾柏昌; 吳東晨; Dong-Chen Wu; 機械工程學系所
2014Defects inspection of CFRP structure by thermography and holographic interferometry黃敏睿; 張勝峰; Sheng-Feng Chang; 機械工程學系所
2015Energy Saving for the Vacuum Pump with Vacuum Generator盧昭暉; 王彥翔; Yen-Hsiang Wang; 機械工程學系所
2015Fabrication of Tungsten Trioxide Low Concentration Acetone SensorsChing-Liang Dai; 戴慶良; 鄭文豪; Wen-Hao Zheng; 機械工程學系所
類別內的文件 (依上傳日期由降冪排序排序): 從 1 到 20 筆,總共 2394 筆
 下一步 >