Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/15858
標題: 考慮離頻效應之多元調諧質量阻尼器參數設計與減震效用
Parametric Design and Vibration Control of Multiple Tuned Mass Damper with Considering Detuned effect
作者: 蔡友仁
Tsai, Yu-Jen
關鍵字: Damper
阻尼器
Detuned
離頻
出版社: 土木工程學系所
引用: 1. Fhram,H. (1911).“Device for Damping Vibration of Bodies”, U.S. Patent No. 989-958. 2. 鍾立來,呉賴雲,林昭葳,黃國倫,曾建創,連冠華,(2005)“結構加裝圓棒型加勁阻尼器之動力分析及試驗驗證”,國家地震中心研究報告,報告編號:NCREE-05-024. 3. Den Hartog, J. P. (1956). Mechanical Vibrations, 4th edition, McGraw-Hill, New York. 4. McNamara, R. J. (1977). “Tuned Mass Dampers for Buildings”, Journal of the Structural Division, ASCE, Vol. 103, pp. 1785-1798. 5. Luft, R. W. (1979). “Optimal Tuned Mass Dampers for Buildings”, Journal of the Structural Division, ASCE, Vol. 105, pp.2766-2772. 6. Wiesner, K. B. (1979). “Tuned Mass Dampers to Reduce Building Wind Motion”, ASCE, Convention and Exposition, Boston, Mass., April 2-6. 7. Rainer, J. H., and Swallow, J. C. (1986). “Dynamic Behavior of a Gymnasium Floor”, Canadian Journal of Civil Engineering, Vol. 13, pp. 270-277. 8. Thornton, C. H., Cuoco, D. A., and Velivasakis, E. E. (1990). “Taming Structural Vibrations”, Civil Engineering, Vol. 60, pp. 57-59. 9. Setareh, M., and Hanson, R. D. (1992). “Tuned Mass Dampers for Balcony Vibration Control”, Journal of Structural Engineering, ASCE, Vol. 118, pp. 723-740. 10. Kwon, H. C., Kim, M. C. and Lee, I. W. (1998). “Vibration Control of Bridges under Moving Loads”, Computers & Structures, Vol. 66, pp. 473-480. 11. 王哲夫, 林其璋, 陳博亮, (1998), “高鐵橋梁裝設調諧質量阻尼器之減振分析”, 第四屆結構工程研討會, Vol. 2, pp. 1203-1210, 臺北, 9月9-11日. 12. Wang, J. F., Lin, C. C., and Chen, B. L. (2003). “Vibration Suppression for High Speed Railway Bridges Using Tuned Mass Dampers”, International Journal of Solids and Structures, Vol.40, pp. 465-491. 13. Crandall, S. H., and Mark, W. D. (1973). Random Vibration in Mechanical Systems, Academic Press, Inc., N. Y. 14. Wirsching, P. H., and Campbell, G. W. (1974). “Minimal Structural Response Under Random Excitation Using the Vibration Absorber”, Earthquake Engineering and Structural Dynamics, Vol. 2, pp. 303-312. 15. Kaynia, A. M., Veneziano, D., and Biggs, J. M. (1981). “Seismic Effectiveness of Tuned Mass Dampers”, Journal of Structural Division, ASCE, Vol. 107, pp. 1465-1484. 16. Sladek, J. R. and Klinger,R. E. (1983).“Effect of Tuned-Mass Dampers on Seismic Response”, Journal of Structural Engineering, ASCE, Vol. 109, pp.2004-2009. 17. Lin, C. C., Hu, C. M., Wang, J. F., and Hu, R. Y. (1994). “Vibration Control Effectiveness of Passive Tuned Mass Dampers”, Journal of the Chinese Institute of Engineers, Vol. 17, pp.367-376. 18. Lin, C. C., Wang, J. F., and Ueng J. M. (2001). “Vibration Control Identification of Seismically-Excited MDOF Structure-PTMD Systems”, Journal of Sound and Vibration, Vol. 240, pp. 87-115. 19. Warburton, G. B. (1982). “Optimal absorber parameters for various combinations of response and excitation parameters”, Earthquake Engineering and Structural Dynamics, Vol. 10, pp.381-401. 20. Asami, T., Wakasono, T., Kameoka, K., Hasegawa, M. and Sekiguchi, H. (1991). “Optimum design of dynamics absorbers for a system subjected to random excitation” JSME International Journal, Series III, Vol. 34, pp. 218-226. 21. Fujino, Y. and Abe, M. (1993). “Design formulas for tuned mass dampers based on a perterbation technique”, Earthquake Engineering and Structural Dynamics, Vol. 22, pp.833-854. 22. Xu, Y. L., and Kwok, K. C. S. (1994). “Semianalytical method for parameteric study of tuned mass dampers”, Journal of Structural Engineering, ASCE, Vol. 120, pp.747-764. 23. Ueng, J. M., Lin, C. C., and Huang, T.C. (1997). “Passive TMDs for Seismic Response Reduction of Multi-story Torsionally-Coupled Buildings”, Proceedings of the 14th International Conference on Structural Mechanics in Reactor Technology (SMiRT-14), Lyon, France, August 17-22. 24. Ueng, J. M., Lin, C. C., Huang, T. C., and Chen, B.R. (1998). “Practical Considerations in TMD Design for Vibration Control of Buildings”, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-6), Vol. 2, pp. 1461-1468. Taipei, ROC, January 14-16. 25. Lin, C. C., Ueng, J. M., and Huang, T. C. (2000). “Seismic Response Reduction of Irregular Buildings Using Passive Tuned Mass Dampers”, International Journal of Engineering Structures, Vol. 22, pp. 513-524. 26. Iwanami, K., and Seto, K. (1984). “Optimum design of dual mass dampers and their effectiveness”, Proceedings of the JSME(C); Vol. 50, pp.44-52 (in Japanese). 27. Igusa, T., and Xu, K. (1990). “Wide-band response characteristics of multiple subsystem with high modal density”, Proceedings of the Second International Conference on Stochastic Structural Dynamics, FL, U.S.A. 28. Igusa, T., and Xu, K. (1991). “Vibration reduction characteristics of distributed tuned mass dampers”, Proceedings of the Fourth International Conference on Recent Advances in Structural Dynamics, Southampton, U.K. 29. Xu, K., and Igusa, T. (1992). “Dynamic characteristics of multiple substructures with closely spaced frequencies”, Earthquake Engineering and Structural Dynamics, 21, 1059-1070. 30. Igusa, T., and Xu, K. (1994). “Vibration control using multiple tuned mass dampers”, Journal of Sound Vibration, Vol. 175, pp. 491-503. 31. Yamaguchi, H. and Harnpornchai, N. (1993). “Fundamental characteristics of multiple tuned mass dampers for suppressing harmonically forced oscillations”, Earthquake Engineering and Structural Dynamics, Vol. 22, pp. 51-62. 32. Abe, M., and Fujino, Y. (1994). “Dynamic characteriszation of multiple tuned mass dampers and some design formulas”, Earthquake Engineering and Structural Dynamics, Vol. 23, pp. 813-835. 33. Abe, M., and Igusa, T. (1995). “Tuned mass dampers for structures with closely spaced natural frequencies”, Earthquake Engineering and Structural Dynamics, Vol. 24, pp. 247-261. 34. Kareem, A. and Kline, S. (1995). “Performance of multiple tuned mass dampers under random loading”, Journal of Structural Engineering, ASCE, Vol. 121, pp.348-361. 35. Jangid, R. S. (1995). “Dynamic characteristics of structures with multiple tuned mass dampers”, Structural Engineering and Mechanics, Vol. 3, pp. 497-509. 36. Jangid, R. S. (1999). “Optimum multiple tuned mass dampers for base-excited undamped system”, Earthquake Engineering and Structural Dynamics, Vol. 28, pp. 1041-1049. 37. Li, C. (1998) “Research on the optimum theories and methods for wind and earthquake resistant control design of high-rise steel structure”, Ph.D. Thesis, Tongji University, Department of Civil Engineering, Shanghai. 38. Li, C. (2000). “Performance of multiple tuned mass dampers for attenuating undesirable oscillations of structures under the ground acceleration”, Earthquake Engineering and Structural Dynamics, Vol. 29, 1405-1421. 39. Lin, C. C., Wang, J. F., and Chen, B. L (2005). “Train-Induced Vibration Control of High-Speed Railway Bridges Equipped with Multiple Tuned Mass Dampers”, Journal of Bridge Engineering. Vol. 10, No. 4, pp. 398-414 40. 王哲夫, 林其璋, 陳博亮, (2000). “考慮扭轉效應橋梁受高速列車荷重之減振分析”, 第五屆結構工程研討會, Vol. 1, pp. 301-308, 南投溪頭, 8月28-30日. 41. 林其璋, 王哲夫, (2001). “多元調諧質量阻尼器於高速鐵路橋梁之減振效用”, 南部科學園區振動防治策略研討會, pp. 109-120, 台南, 11月27日. 42. Ueng, J. M., Lin, C. C., and Wang, J. F. (2005), “Practical Design Issues of Tuned Mass Dampers for Torsionally-Coupled Buildings under Earthquake Loadings”, Structural Design of Tall and Special Buildings.(in press) 43. Lin, C. C., Hong, L. L., Ueng, J. M., Wu, K. C., and Wang, C.E. (2005), “Parametric Identification of Asymmetric Buildings From Earthquake Response Records”, Smart Materials and Structures, Vol. 14, No. 4 , pp. 850-861. 44. Wang, J. F., Lin, C. C. (2005), “Seismic Performance of Multiple Tuned Mass Dampers for Soil-Irregular Building Interaction System”, International Journal of Solids and Structures, Vol. 42, No. 20, pp. 5536-5554. 45. 練健勳,”考慮衝程限制之多元調諧質量阻尼器參數設計與減振效用”,國立中興大學土木工程研究所碩士論文,2007. 46. 楊正文,”多元調諧質量阻尼器之設計參數比較分析”, 國立中興大學土木工程研究所碩士論文,2006. 47. 劉吉豐,” 多元調諧質量阻尼器最佳化之比較與研究”, 國立中興大學土木工程研究所碩士論文,2008.
摘要: 本文主要探討多元調諧質量阻尼器(Multiple Tuned Mass Damper,簡稱MTMD)在考慮離頻效應下的最佳化設計,期望藉由從新加入一個離頻減振效能指標,設計出一組MTMD參數,當結構體發生離頻現象時,該組MTMD參數能比傳統MTMD設計方法更有效地對離頻時的結構受振反應作折減。藉著與其他三種傳統MTMD設計方法以數值模擬的方式,以及在輸入真實地震加速度歷時下作動力歷時分析比較,來驗證本文方法之可行性,並且接著針對該設計方法討論不同MTMD個數時減振能力的差異性,以及針對離頻時的減振性能表現作討論分析。
The primarily research of this article is the optimum parametric design of Multiple Tuned Mass Damper (MTMD) with considering detuned effect. We attempt to design one set of MTMD parameters by using a new vibrated reduced index. And this MTMD set is going to show the better behavior in vibrated response reduction than the MTMD set designed by traditional method as the targeted structure is detuned. We'll prove the possibility of the method by comparing with other three traditional design method in numerical approximate and dynamic analysis that use the real earthquake time history record as input applied force. To continue, we focus on the new designed MTMD, discussing the variation of the reduction effect by changing numbers of MTMD. And in the end, we make a conclusion to this research.
URI: http://hdl.handle.net/11455/15858
其他識別: U0005-2506200810542000
文章連結: http://www.airitilibrary.com/Publication/alDetailedMesh1?DocID=U0005-2506200810542000
Appears in Collections:土木工程學系所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.