Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/15863
標題: 考慮設計反應譜之多元調諧質量阻尼器參數設計與減振效用
Parametric Design and Vibration Control of Multiple Tuned Mass Damper with Considering Design Spectrum
作者: 蘇冠中
Su, Kuan-Chung
關鍵字: Design Spectrum
設計反應譜
Damper
阻尼器
出版社: 土木工程學系所
引用: 參考文獻 1. Fhram,H. (1911).“Device for Damping Vibration of Bodies”, U.S. Patent No. 989-958. 2. 鍾立來,呉賴雲,林昭葳,黃國倫,曾建創,連冠華,(2005)“結構加裝圓棒型加勁阻尼器之動力分析及試驗驗證”,國家地震中心研究報告,報告編號:NCREE-05-024. 3. Den Hartog, J. P. (1956). Mechanical Vibrations, 4th edition, McGraw-Hill, New York. 4. McNamara, R. J. (1977). “Tuned Mass Dampers for Buildings”, Journal of the Structural Division, ASCE, Vol. 103, pp. 1785-1798. 5. Luft, R. W. (1979). “Optimal Tuned Mass Dampers for Buildings”, Journal of the Structural Division, ASCE, Vol. 105, pp.2766-2772. 6. Wiesner, K. B. (1979). “Tuned Mass Dampers to Reduce Building Wind Motion”, ASCE, Convention and Exposition, Boston, Mass., April 2-6. 7. Rainer, J. H., and Swallow, J. C. (1986). “Dynamic Behavior of a Gymnasium Floor”, Canadian Journal of Civil Engineering, Vol. 13, pp. 270-277. 8. Thornton, C. H., Cuoco, D. A., and Velivasakis, E. E. (1990). “Taming Structural Vibrations”, Civil Engineering, Vol. 60, pp. 57-59. 9. Setareh, M., and Hanson, R. D. (1992). “Tuned Mass Dampers for Balcony Vibration Control”, Journal of Structural Engineering, ASCE, Vol. 118, pp. 723-740. 10. Kwon, H. C., Kim, M. C. and Lee, I. W. (1998). “Vibration Control of Bridges under Moving Loads”, Computers & Structures, Vol. 66, pp. 473-480. 11. 王哲夫, 林其璋, 陳博亮, (1998), “高鐵橋梁裝設調諧質量阻尼器之減振分析”, 第四屆結構工程研討會, Vol. 2, pp. 1203-1210, 臺北, 9月9-11日. 12. Wang, J. F., Lin, C. C., and Chen, B. L. (2003). “Vibration Suppression for High Speed Railway Bridges Using Tuned Mass Dampers”, International Journal of Solids and Structures, Vol.40, pp. 465-491. 13. Crandall, S. H., and Mark, W. D. (1973). Random Vibration in Mechanical Systems, Academic Press, Inc., N. Y. 14. Wirsching, P. H., and Campbell, G. W. (1974). “Minimal Structural Response Under Random Excitation Using the Vibration Absorber”, Earthquake Engineering and Structural Dynamics, Vol. 2, pp. 303-312. 15. Kaynia, A. M., Veneziano, D., and Biggs, J. M. (1981). “Seismic Effectiveness of Tuned Mass Dampers”, Journal of Structural Division, ASCE, Vol. 107, pp. 1465-1484. 16. Sladek, J. R. and Klinger,R. E. (1983).“Effect of Tuned-Mass Dampers on Seismic Response”, Journal of Structural Engineering, ASCE, Vol. 109, pp.2004-2009. 17. Lin, C. C., Hu, C. M., Wang, J. F., and Hu, R. Y. (1994). “Vibration Control Effectiveness of Passive Tuned Mass Dampers”, Journal of the Chinese Institute of Engineers, Vol. 17, pp.367-376. 18. Lin, C. C., Wang, J. F., and Ueng J. M. (2001). “Vibration Control Identification of Seismically-Excited MDOF Structure-PTMD Systems”, Journal of Sound and Vibration, Vol. 240, pp. 87-115. 19. Warburton, G. B. (1982). “Optimal absorber parameters for various combinations of response and excitation parameters”, Earthquake Engineering and Structural Dynamics, Vol. 10, pp.381-401. 20. Asami, T., Wakasono, T., Kameoka, K., Hasegawa, M. and Sekiguchi, H. (1991). “Optimum design of dynamics absorbers for a system subjected to random excitation” JSME International Journal, Series III, Vol. 34, pp. 218-226. 21. Fujino, Y. and Abe, M. (1993). “Design formulas for tuned mass dampers based on a perterbation technique”, Earthquake Engineering and Structural Dynamics, Vol. 22, pp.833-854. 22. Xu, Y. L., and Kwok, K. C. S. (1994). “Semianalytical method for parameteric study of tuned mass dampers”, Journal of Structural Engineering, ASCE, Vol. 120, pp.747-764. 23. Ueng, J. M., Lin, C. C., and Huang, T.C. (1997). “Passive TMDs for Seismic Response Reduction of Multi-story Torsionally-Coupled Buildings”, Proceedings of the 14th International Conference on Structural Mechanics in Reactor Technology (SMiRT-14), Lyon, France, August 17-22. 24. Ueng, J. M., Lin, C. C., Huang, T. C., and Chen, B.R. (1998). “Practical Considerations in TMD Design for Vibration Control of Buildings”, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-6), Vol. 2, pp. 1461-1468. Taipei, ROC, January 14-16. 25. Lin, C. C., Ueng, J. M., and Huang, T. C. (2000). “Seismic Response Reduction of Irregular Buildings Using Passive Tuned Mass Dampers”, International Journal of Engineering Structures, Vol. 22, pp. 513-524. 26. Iwanami, K., and Seto, K. (1984). “Optimum design of dual mass dampers and their effectiveness”, Proceedings of the JSME(C); Vol. 50, pp.44-52 (in Japanese). 27. Igusa, T., and Xu, K. (1990). “Wide-band response characteristics of multiple subsystem with high modal density”, Proceedings of the Second International Conference on Stochastic Structural Dynamics, FL, U.S.A. 28. Igusa, T., and Xu, K. (1991). “Vibration reduction characteristics of distributed tuned mass dampers”, Proceedings of the Fourth International Conference on Recent Advances in Structural Dynamics, Southampton, U.K. 29. Xu, K., and Igusa, T. (1992). “Dynamic characteristics of multiple substructures with closely spaced frequencies”, Earthquake Engineering and Structural Dynamics, 21, 1059-1070. 30. Igusa, T., and Xu, K. (1994). “Vibration control using multiple tuned mass dampers”, Journal of Sound Vibration, Vol. 175, pp. 491-503. 31. Yamaguchi, H. and Harnpornchai, N. (1993). “Fundamental characteristics of multiple tuned mass dampers for suppressing harmonically forced oscillations”, Earthquake Engineering and Structural Dynamics, Vol. 22, pp. 51-62. 32. Abe, M., and Fujino, Y. (1994). “Dynamic characteriszation of multiple tuned mass dampers and some design formulas”, Earthquake Engineering and Structural Dynamics, Vol. 23, pp. 813-835. 33. Abe, M., and Igusa, T. (1995). “Tuned mass dampers for structures with closely spaced natural frequencies”, Earthquake Engineering and Structural Dynamics, Vol. 24, pp. 247-261. 34. Kareem, A. and Kline, S. (1995). “Performance of multiple tuned mass dampers under random loading”, Journal of Structural Engineering, ASCE, Vol. 121, pp.348-361. 35. Jangid, R. S. (1995). “Dynamic characteristics of structures with multiple tuned mass dampers”, Structural Engineering and Mechanics, Vol. 3, pp. 497-509. 36. Jangid, R. S. (1999). “Optimum multiple tuned mass dampers for base-excited undamped system”, Earthquake Engineering and Structural Dynamics, Vol. 28, pp. 1041-1049. 37. Li, C. (1998) “Research on the optimum theories and methods for wind and earthquake resistant control design of high-rise steel structure”, Ph.D. Thesis, Tongji University, Department of Civil Engineering, Shanghai. 38. Li, C. (2000). “Performance of multiple tuned mass dampers for attenuating undesirable oscillations of structures under the ground acceleration”, Earthquake Engineering and Structural Dynamics, Vol. 29, 1405-1421. 39. Lin, C. C., Wang, J. F., and Chen, B. L (2005). “Train-Induced Vibration Control of High-Speed Railway Bridges Equipped with Multiple Tuned Mass Dampers”, Journal of Bridge Engineering. Vol. 10, No. 4, pp. 398-414 40. 王哲夫, 林其璋, 陳博亮, (2000). “考慮扭轉效應橋梁受高速列車荷重之減振分析”, 第五屆結構工程研討會, Vol. 1, pp. 301-308, 南投溪頭, 8月28-30日. 41. 林其璋, 王哲夫, (2001). “多元調諧質量阻尼器於高速鐵路橋梁之減振效用”, 南部科學園區振動防治策略研討會, pp. 109-120, 台南, 11月27日. 42. Ueng, J. M., Lin, C. C., and Wang, J. F. (2005), “Practical Design Issues of Tuned Mass Dampers for Torsionally-Coupled Buildings under Earthquake Loadings”, Structural Design of Tall and Special Buildings.(in press) 43. Lin, C. C., Hong, L. L., Ueng, J. M., Wu, K. C., and Wang, C.E. (2005), “Parametric Identification of Asymmetric Buildings From Earthquake Response Records”, Smart Materials and Structures, Vol. 14, No. 4 , pp. 850-861. 44. Wang, J. F., Lin, C. C. (2005), “Seismic Performance of Multiple Tuned Mass Dampers for Soil-Irregular Building Interaction System”, International Journal of Solids and Structures, Vol. 42, No. 20, pp. 5536-5554. 45. 國立中央大學應用地質研究所蔡璧嬬同學碩士論文-台灣自由場強震站場址分類之進一步研究 46. 國立中興大學研究生黃鈞鼎論文-地盤特性對組尼係數的影響 47. 內政部建築研究所-建築物耐震設計規範及解說 48. 國立中興大學研究生練健勳論文-考慮衝程限制之多元調諧質量阻尼器參數設計與減振效用 49. 國立中興大學研究生楊正文論文-多元調諧質量阻尼器之設計參數比較分析
摘要: 本文主要介紹一種新的MTMD參數設計方法:考慮設計反應譜之MTMD參數設計。相較於傳統將輸入外力考慮為白噪音的MTMD參數設計方法,額外考慮了設計反應譜,期望能夠藉由設計反應譜反映出在不同地區不同地盤的特性對結構物的影響。文中將針對兩種不同週期的結構物,分別為短週期以及中長週期,比較在傳統設計方法與考慮設計反應譜的設計方法之下,輸入外力為白噪音時的減振效果比較;以及在三筆真實的地震歷時輸入的情況下,兩種設計方法的減振效果以及離頻效應的比較。結果顯示,在結構物為中長週期的情況下,考慮設計反應譜的MTMD參數設計法相較於傳統的MTMD參數設計法,不論是在減振效果或是離頻效應上,都有著較為優秀的表現。
This article mainly introduces a new MTMD parameter design method:parametric design of Multiple Tuned Mass Damper with considering design spectrum. Will compare inputs the external force consideration to the tradition for the white noise MTMD parameter design method, considered the design spectrum, expected will be able to reflect the different local characteristic to the structure influence by the design spectrum. In the article will aim at two kind of structures with different period, short period and long period, compared with in the traditional design method and considering design spectrum method, the input external force for the white noise will reduce effect to compare; And compare two designs methods with reduces effect and detund effect in three real earthquakes inputs. The result showed that, in the structure for long period situation, considering design spectrum method compares to the traditional MTMD parameter design method, no matter in reduces effect to the detund effect , all has a more outstanding performance, has a more outstanding performance.
URI: http://hdl.handle.net/11455/15863
其他識別: U0005-2506200812072100
文章連結: http://www.airitilibrary.com/Publication/alDetailedMesh1?DocID=U0005-2506200812072100
Appears in Collections:土木工程學系所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.