Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/2786
DC FieldValueLanguage
dc.contributor李吉群zh_TW
dc.contributorJi-Chun Leeen_US
dc.contributor.author洪茂安zh_TW
dc.contributor.authorHung, Mao-Anen_US
dc.contributor.other機械工程學系所zh_TW
dc.date2013en_US
dc.date.accessioned2014-06-05T11:43:55Z-
dc.date.available2014-06-05T11:43:55Z-
dc.identifierU0005-2208201307023600en_US
dc.identifier.citation[1]陳政雄,”硬脆性的材料雷射超精密加工技術”,機械工業雜誌,264期 [2]丁勝懋,”雷射工程導論”,第四版,中央圖書出版社,台北市,2000 [3]紀國鐘,鄭晃忠, “液晶顯示器技術手冊” [4]陳胤豪, 超快雷射應用於ITO 層去除加工之探討 [5]友達光電首頁/技術研發, http://www.auo.com/auoDEV/technology.php [6] 陣列維修系統AS860 series,奧寶科技 http://www.orbotech.com/Tch/D2_B_ProductsGroup/MenuID/1041/ [7] K. Niemax and W. Sdorra, “Optical emission spectrometry and laser-induced fluorescence of laser produced sample plumes”, Applied Optics, 1990, 29, 5000. [8]J. Uebbing, J. Brust, W. Sdorra, F. Leis and K. Niemax, “Reheating of laser-produced plasma by a second pulse laser”, Appl. Spectrosc., 1995, 49, 1419. [9] Karl-Heinz Leitz, Benjamin Redlingshöfer, Yvonne Reg, Andreas Otto, Michael Schmidt, ”Metal Ablation with Short and Ultrashort Laser Pulses “, Physics Procedia,12, Part B, 2011, 230, 238. [10] E. G. Gamaly A. V. Rode, V. T. Tikhonchuk, and B. Luther-Davies, “Ablation of Solids by Femtosecond Lasers: ablation mechanism and ablation thresholds for metals and dielectrics”, Phys. Plasmas ,9,2002, 949. [11] Xianzhong Zeng, Xianglei Mao, Ralph Greif, Richard E. Russo, ” Ultraviolet Femtosecond and Nanosecond Laser Ablation of Silicon: ablation efficiency and laser-induced plasma expansion”, Proc. SPIE 5448, High-Power Laser Ablation V, 2004, 1150. [12] Centurion (40 mJ), Quantel http://www.quantel-laser.com/products/item/centurion-40-mj--135.htmlen_US
dc.identifier.urihttp://hdl.handle.net/11455/2786-
dc.description.abstract本論文主要目的是利用雷射的高準確性針對TFT LCD中的Array製程缺陷在不破壞下層線路的條件下進行單一層別的修補。 液晶顯示器製作上為高成本,在製作過程常因製程或環境不良造成TFT LCD panel部份有缺陷,一般液晶顯示器像素有損壞就必需將像素修成暗點或微亮點,利用目視整個螢幕時人眼不易觀察到單一子像素缺陷來進行修補,以提升產品良率等級,目前業界多以雷射針對金屬熔接與切割方式來進行,藉由雷射高密度能量將照射區域範圍的線路燒熔氣化來達成切割或利用雷射照射時金屬燒熔將以隔離層隔開的上下兩金屬層做熔接。本研究之目的是藉由精密的雷射能量控制達到在不傷到下層金屬線路的條件下對單一層別金屬線路進行修補,使像素成為正常驅動的像素,其中包括液晶顯示器製程研究,驅動原理及像素修補設計,透過雷射修補像素缺陷,藉此學習研究提升液晶顯示器良率。 本研究先討論Nd:YAG雷射加工以雷射進行切割,融合等動作,分別針對雷射修補機台輸出的個別波長做雷射能量量測求得製程能力範圍,以雷射能量控制進行參數最佳化並以Array製程中的金屬層別材質來試驗,我們嘗試以不同雷射能量及波長對金屬層別進行挖除實驗,搭配光學顯微鏡觀察及電性檢測確認成效以求得精確的製程參數。實驗中分別以1064/532/266 nm波長雷射進行實驗,得到以266nm波長雷射進行單一金屬層的移除較不會造成下層金屬線路的損傷,電性檢測結果的良率也較其他波長為高,故我們以266nm波長雷射來進行單層金屬移除有較好的結果。zh_TW
dc.description.abstractUsing the laser with high-accuracy for defects repaired in Array process of TFT LCD manufacturing under the condition of single layer ablation without bottom line damaged. LCD display is the high cost of production in the production process. Defects caused by poor process or the environment of TFT LCD process. Generally the damaged pixel of TFT LCD is necessary to repair to a dark point or a slightly dark point. The human eye is difficult to observe a single sub-pixel defects to be repaired when look at the entire screen in order to enhance product yield. The industry mostly use laser for metal welding and cutting methods to repair. By laser irradiation area of high density energy range of the line pillow melting gasification to achieve cutting or using laser irradiation to isolated metal welded two layers separated by a metal layer to do welding. The purpose of this study is controlled by precision laser energy to achieve a single layer metal line repaired without injury to the lower metal line to become normal driving the pixel. This study is included the TFT LCD manufacture process, the driving principle and design of pixel repair. Defects repaired by laser of this study to improve the yield of TFT LCD. This research first discusses the laser to do the cutting, welding and other actions. Experiment of laser energy to determined the capability for process with individual laser wavelength. We try to optimize the laser energy parameter on metal of Array manufacturing process with different wavelength and laser energy to remove the metal layer individually. To confirm the effectiveness of the process with optical microscopy and electrical testing achieve precise parameters. Experiments were carried out with 1064/532/266 nm wavelength laser, and 266nm wavelength laser for the removal of a single metal layer over the line will not cause damage to the underlying metal. The yield of electrical test results is better than other wavelengths, so we single 266nm wavelength laser for metal removal have better results.en_US
dc.description.tableofcontents誌謝................................... ............................................................................... II 中文摘要.......................................................................................................... III 英文摘要.......................................................................................................... IV 目次 ............................................................................................................... V 圖目次 ........................................................................................................... VII 表目次 ........................................................................................................... X 第一章 簡介與研究動機 ............................................................................ 1 1.1 前言 ....................................................................................................... 1 1.2 研究動機與目的 ................................................................................... 1 1.3 論文架構 ............................................................................................... 2 第二章 液晶顯示器製程.............................................................................. 4 2.1液晶顯示器製程原理................................................................................ 4 2.2液晶顯示器驅動原理................................................................................ 7 2.3 液晶顯示器像素架構............................................................................... 8 2.4液晶顯示器製程缺陷................................................................................ 10 第三章 雷射系統介紹與雷射修補原理...................................................... 14 3.1雷射原理 .................................................................................................. 14 3.2原子的光譜與能階 .................................................................................. 16 3.3雷射組成基本架構.................................................................................... 23 3.4雷射的種類................................................................................................ 25 3.5 雷射加工…............................................................................................... 26 3.6 雷射修補原理........................................................................................... 28 第四章 實驗方法與步驟.............................................................................. 36 4.1雷射移除文獻參考與實驗方法選定........................................................ 36 4.2實驗儀器介紹............................................................................................ 44 4.3雷射能量量測............................................................................................ 48 4.4實驗數據收集............................................................................................ 52 4.5實驗結果資料分析.................................................................................... 56 第五章 實驗結果與討論 ............................................................................ 62 5.1 雷射單層移除應用與討論 ..................................................................... 62 5.2結論 ……………….................................................................................. 62 參考文獻 ........................................................................................................ 64zh_TW
dc.language.isozh_TWen_US
dc.publisher機械工程學系所zh_TW
dc.relation.urihttp://www.airitilibrary.com/Publication/alDetailedMesh1?DocID=U0005-2208201307023600en_US
dc.subject雷射zh_TW
dc.subjectLaseren_US
dc.subject移除zh_TW
dc.subjectablationen_US
dc.title以Nd:YAG雷射進行單層金屬移除於TFT-LCD修補之研究zh_TW
dc.titleStudy of single layer ablation of metal using Nd:YAG LASER on TFT-LCD repairen_US
dc.typeThesis and Dissertationzh_TW
Appears in Collections:機械工程學系所
文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.