搜尋


目前的篩選器:
開始新的搜尋
新增篩選器:

使用篩選器讓結果更精確。


第 1 到 42 筆結果,共 42 筆。
  • 上一個
  • 1
  • 下一個
符合的文件:
日期標題作者全文
12004(Journal of Micromechanics and Microengineering,14(2):277-282)Micro-ball lens array modeling and fabrication using thermal reflow in two polymer layersH. Yang; C.K. Chao; C.P. Lin; S.C. Shen; 國立中興大學精密工程所-
22007(Microsystem Technologies,13:1623-1628)Miniaturized fluorescence excitation platform with optical fiber for bio-detection chipsH. Yang; C.T. Lee; F.Y. Chang; 國立中興大學精密工程所-
32006(Microsystem Technologies,12:760-765)Microchannel heat sink fabrication with roughened bottom wallsH. Yang; F. Lee; R. Chein; 國立中興大學精密工程所-
42007(International Journal of Advanced Manufacturing Technology,34(9-10):889-897)248 nm Excimer Laser Drilling PI Film for Nozzle Plate ApplicationC.T. Pan; H. Yang; M.K. Wei; 國立中興大學精密工程所-
52007(Journal of Micromechanics and Microengineering,17:419-425)Fabrication of a microlens array electroformed mold with low roughness and high hardnessT.H. Lin; S.Y. Hung; H. Yang; C.K. Chao; 國立中興大學精密工程所-
62007(Materials Science and Technology,23(8):980-986)PET Polymer Ablation Using Excimer Laser for Nozzle Plate ApplicationsC.T. Pan; H. Yang; M.K. Wei; F.Y. Chang; 國立中興大學精密工程所-
72006(Microsystem Technologies,12:899-905)Triplex-Pumping CD-Like Microfluidic Platform with Parabolic MicrochannelsG.J. Wang; J.H. Chang; H. Yang; 國立中興大學精密工程所-
82003(Tamkang Journal of Science and Engineering,06(3):145-150)Analogous micro-optical components fabricated using excimer laser ablationH. Yang; C.T. Pan; 國立中興大學精密工程所
92006(Journal of the Chinese Society of Mechanical Engineers,27(5):611-616)Bonding strength measurement of electroforming porous copper for heat sinksH.Yang; C.C. Wu; W.L. Hsueh; 國立中興大學精密工程所-
102007(Optical Engineering,46(4):043402.1-043402.8)Optimal design using thermal reflow and caulking for fabrication of gapless microlens array mold insertsS.Y. Hung; C.P. Lin; H. Yang; Y.P. Chang; 國立中興大學精密工程所-
112005(Microsystem Technologies,12:173-179)Integrated electromagnetic microactuator with a large driving forceC.T. Pan; H. Yang; M.C. Chou; S.C. Shen; 國立中興大學精密工程所-
122006(Microsystem Technologies,12:187-192)High-aspect-ratio microstructural posts electroforming modeling and fabrication in LIGA processH. Yang; R. Chein; T.H. Tsai; J.C. Chang; J.C. Wu; 國立中興大學精密工程所-
132002(Journal of Micromechanics and Microengineering,12(5):611-615)A low-temperature wafer bonding technique using patternable materialsC.T. Pan; H. Yang; S.C. Shen; M.C. Chou; H.P. Chou; 國立中興大學精密工程所-
142004(Microsystem Technologies,10(7):571-577)High-aspect-ratio microstructure filling by centrifugal force field modelingT.H. Tsai; H. Yang; R. Chein; 國立中興大學精密工程所-
152004(Journal of Micromechanics and Microengineering,14(6):1197-1204)High fill-factor microlens array mold insert fabrication using a thermal reflow processH. Yang; C.K. Chao; M.K. Wei; C.P. Lin; 國立中興大學精密工程所-
162005(Microsystem Technologies,12:082-090)Fabrication of microlens array with graduated sags using UV proximity printing methodH. Yang; C.K. Chao; T.H. Lin; C.P. Lin; 國立中興大學精密工程所-
172004(Sensors and Materials,16(1):013-024)Efficient coupling of electrostatic optical fiber switchC.T. Pan; S.C. Shen; H.Yang; 國立中興大學精密工程所-
182006(Materials Science Forum,505-507(2):271-276)Fabrication of Rolling Mold for a 200μm Microlens Array by 3D LIGA-Like ProcessesJ.C. Tsai; K. Liu; H. Yang; 國立中興大學精密工程所-
192003(International Journal of Advanced Manufacturing Technology,121(12):1029-1034)Cumulative heat effect in excimer laser ablation polymer PC and ABSM.K. Wei; H. Yang; 國立中興大學精密工程所-
202004(Microsystem Technologies,10(5):351-356)New electroforming technology pressure aid for LIGA processT.H. Tsai; H. Yang; R. Chein; 國立中興大學精密工程所-
212008(Microsystem Technologies,14(7):1035-1040)New horizontal frustum optical waveguide fabrication using UV proximity printingT.H. Lin; H. Yang; R.F. Shyu; C.K. Chao; 國立中興大學精密工程所-
222003( Journal of Micromechanics and Microengineering,13(5):775-781)Hexagonal microlens array modeling and fabrication using a thermal reflow processC.P. Lin; H. Yang; C.K. Chao; 國立中興大學精密工程所-
232004(Sensors and Actuators B: Chemical,101(3):322-327)D-type fiber optic sensor used as a refractometer based on total-internal reflection heterodyne interferometryM.H. Chiu; S.N. Hsu; H.Yang; 國立中興大學精密工程所
242008(International Journal of Advanced Manufacturing Technology,36:053-059)A promising thermal pressing used in fabricating microlens arrayR.F. Shyu; H. Yang; 國立中興大學精密工程所-
252006(Microsystem Technologies,12:907-912)New production method of convex microlens arrays for integrated fluorescence microfluidic detection systemsH. Yang; R.F. Shyu; J.W. Huang; 國立中興大學精密工程所-
262006(International Journal of Advanced Manufacturing Technology,29(5):518-523)Vacuum suction aid for microlens array formation using LIGA-like processR.F. Shyu; H. Yang; 國立中興大學精密工程所-
272008(Key Engineering Materials,364-366:955-960)Diffration effect in proximity printing of circular aperture arrayJ.C. Tsai; M.Y. Hsieh; H. Yang; 國立中興大學精密工程所-
282007(Microsystem Technologies,13:1537-1543)Concave microlens array mold fabrication in photoresist using UV proximity printingT.H. Lin; H. Yang; C.K. Chao; 國立中興大學精密工程所-
292006(Journal of the Chinese Institute of Engineers,29(4):697-706)Modeling and Fabrication of a Piezoelectric Vibration-Induced Micro Power GeneratorG.J. Wang; W.C. Yu; Y.H. Lin; H. Yang; 國立中興大學精密工程所-
302007(Microwave and Optical Technology Letters,49(1):023-029)The robust design for gapless microlens array fabrication using the incomplete developing and thermal reflow processS.Y. Hung; S.N. Chen; C.P. Lin; H. Yang; 國立中興大學精密工程所-
312007(Microsystem Technologies,13:1601-1606)Micro-ball lens array fabrication in photoresist using PTFE hydrophobic effectR.F. Shyu; H. Yang; W.R. Tsai; J.C. Tsai; 國立中興大學精密工程所-
322004(Microsystem Technologies,10(2):155-160)Optical switch with auto-aligning fibers and latching micro-mirrorsH. Yang; C.T. Pan; S.C. Shen; 國立中興大學精密工程所-
332004(Biomedical Microdevices,06(1):047-053)Centrifugal and electrical field forces dual-pumping CD-like microfludic platform for biomedical separationGou Jen Wang; Wen Haw Hsu; Yau Zin Chang; Hsiharng Yang; 國立中興大學精密工程所-
342008(Sensors and Actuators A: Physical,147(1):093-098)Semi-ellipsoid microlens simulation and fabrication for enhancing optical fiber coupling efficiencyJ.Y. Hu; C.P. Lin; S.Y. Hung; H.Yang; C.K. Chao; 國立中興大學精密工程所-
352008(Microsystem Technologies,14(09-11):1263-1267)Fast patterning microstructures using inkjet printing conformal masksC.H. Lin; H. Yang; F.Y. Chang; S.H. Chang; M.T. Yen; 國立中興大學精密工程所-
362002(Journal of Micromechanics and Microengineering,112(2):157-161)Excimer laser-induced formation of metallic microstructures by electroless copper platingH. Yang; C.T. Pan; 國立中興大學精密工程所-
372003(Journal of Micromechanics and Microengineering,13(5):748-757)A new microlens array fabrication method using UV proximity printingC.P. Lin; H. Yang; C.K. Chao; 國立中興大學精密工程所-
382001(Journal of Micromechanics and Microengineering,11(2):094-099)Ultra-fine machining tool/molds by LIGA technologyH. Yang; C.T. Pan; M.C. Chou; 國立中興大學精密工程所-
392000(International Journal of Machine Tools & Manufacture,40:1065-1072)Improvement of thickness uniformity in nickel electroforming for the LIGA processH. Yang; S.W. Kang; 國立中興大學精密工程所-
402000(Sensors and Materials,11(6):339-347)Behavior of the developing process for ultra-deep microstructuresC.T. Pan; H. Yang; H.J. Wang; M.C. Chou; 國立中興大學精密工程所-
412001(Microsystem Technologies,07:036-039)Microcomposite electroforming for LIGA technologyM.C. Chou; H. Yang; S.H. Yeh; 國立中興大學精密工程所-
422007(Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2007, Stresa, lago Maggiore, Italy:377-382)Fabrication of miniaturized variable-focus lens using liquid filling techniqueH. Yang; C.Y. Yang; M.S. Yeh; 國立中興大學精密工程所-
第 1 到 42 筆結果,共 42 筆。
  • 上一個
  • 1
  • 下一個