Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/4097
標題: 滾壓式製程於中尺寸導光板之模擬與製程研究
Simulation and fabrication process study of roller-pressing in mid-size light-guide plates
作者: 陳勇嘉
Chen, Yung-Chia
關鍵字: TFT-LCD
平面顯示器
back light module
light guide plate,LED
roller-pressing fabrication
,dry-film photoresist
背光模組
導光板,LED
滾壓製程
乾式光阻
出版社: 精密工程學系所
引用: [1] 工研院經資中心 IEK,產業報告, 2003。 [2] 鮑友南、姚柏宏、林育正、孫翊庭, LCD背光模組之現況與未來, 機械工業雜誌257期, 2004, 8月號。 [3] 曾文政,液晶顯示器背光板用導光板V-CUT加工之探討,義守大學材料科學與工程學系碩士論文, 中華民國九十三年七月。 [4] Vikuiti™ Brightness Enhancement Film (BEF) III, 3M. [5] 陳建人,微機電系統技術與應用(上),行政院國家科學委員會精密儀器發展中心出版, 2004。 [6] 蔡俊欽,導光板光學設計及製程之最佳化研究,高雄應用科技大學模具工程研究所碩士論文, 中華民國九十三年六月。 [7] 鄭翔遠,背光模組及背光源之設計,大葉大學電機工程學研究所碩士論文, 中華民國九十三年。 [8] 張耀祖,使用發光二極體為光源的背光板設計,中華大學電機工程研究所碩士論文,中華民國九十三年。 [9] 莊朝欽,高均勻度導光板之設計,中華大學電機工程研究所碩士論文, 中華民國九十二年六月。 [10] 方育斌,LCD背光模組之光學最佳化設計,成功大學工程科學研究所碩士論文, 中華民國九十三年六月。 [11] 易威廷,新型微結構於導光板設計分析,中興大學精密工程所碩士論文, 中華民國九十四年六月。 [12] 吳孟諭,微圓錐狀結構提高導光板亮度製程研究,中興大學精密工程所碩士論文, 中華民國九十四年六月。 [13] K. Kalantar, S. Matsumoto, T. Onishi, and K. Takizawa, “Optical Micro Deflector Based Functional Light-Guide Plate for Backlight Unit,” SID DIGEST, PP. 1029-1031, 2000. [14] A. Tagaya, M. Nagai, Y. Koike, and K. Yokoyama, “Thin liquid-crystal display backlight system with highly scattering optical transmission polymers, ” APPLIED OPTICS, 40(34), pp. 6274-6280, 2001. [15] T. Okumura, A. Tagaya, Y. Koike, M. Horiguchi, and H. Suzuki, “Highlyefficient backlight for liquid crystal display having no optical films, ” APPLIED PHYSICS LETTERS, 83(13), pp. 2515-2517, 2003. [16] A. Tagaya and Y. Koike, “Highly scattering optical transmission polymers for bright display, ” MACROMOLECULAR SYMPOSIA, 154, pp. 73-82, 2000. [17] M. Minamitania, Y. Utsumib, Y. Tanakaa, and T. Hattorib, “3D Microstructure Fabrication for a High Luminosity Lighting-Panel for LCD using Synchrotron Radiation, ” FUJIPREAM Corporation, 2003. [18] C. Y. Tai, “Divergent angle rotator system and method for collimating light beams, ” US-PATENT 5854872, December 29, 1998. [19] C. Y. Tai, and H. Zou, “Backlighting system with a multi-reflection light injection system and using microprisms, ” US-PATENT 5359691, October 25, 1994. [20] T. Masaki, “Lens light guide plate and surface light equipment using the same,” US-PATENT 6139162, March 16, 1998. [21] S. Miyashita, O. Yokoyama, and T. Funamoto, “Input tablet and liquid crystal display device utilizing such tablet,” US-PATENT 6264343, November 13, 1997 [22] S. Ohkawa, H. Yamazaki, and J, Ohkuma, “Guide plate, surface light source device of side light type and liquid crystal display,” US-PATENT 6568820, December 22, 1999. [23] M. Megumi, U. Yuichi, and H. Tadashi, “3D Microstructure Fabrication for a High Luminosity Lighting-Panel for LCD using Synchrotron Radiation, ” Harmst 2003 Full Paper. [24] J. H. Park, Y. K. Yoon, M. R. Prausnitz, and M. G. Allen, “High-Aspect-Ratio Tapered Structures using an Integrated Lens Technique, ”IEEE, pp. 383-386, 2004. [25] K. Kabseog, S. P. Daniel, M. L. Hong, C. Wooseong, K. Kyunghwan, J. B. Lee, and H. A. Chong, “A tapered hollow metallic microneedle array using backside exposure of SU-8, ” J.Micromech. Microeng. 14, pp. 597-603, 2004. [26] D. Suyama, J. Kawarabayashi, A. Uritani, and T. Iguchi, “Micro Cone Detector, ” IEEE, 5, pp. 81-83, 2001. [27] 謝正倫,滾輪微結構壓印製程開發研究,台灣大學機械工程學系碩士論文, 中華民國九十三年六月。 [28] Liang, Chang, Chen, David, Chung, and Jerry, “Directional diffusing film,” US-PATENT 6505959, April 23, 2001. [29] D. Khang, H. Kang, T. Kim, and H. Lee, “ Low-Pressure Nanoimprint Lithography ,” Nano Lett., Vol. 4, No. 4, pp.633-637, 2004. [30] T. Katoh, “Direct Writing for Three-Dimensional Microfabrication Using Synchrotron Radiation Etching,” The Thirteenth Annual International Conference, IEEE Journal of Micro Electro Mechanical Systems, pp. 556-561, 2000. [31] 陳錫桓,光學近代物理,中央圖書出版社,中華民國83年二月。 [32] D. C. O’Shea,“Elements of modern optical design,” John Wiley & Sons, New York, 1985. [33] Lambda Research Corporation, “Trace Pro-Software for Opto-Mechanical Modeling User’s Manual Release 3.0,” 2002. [34] George H. Martin,張安欣 等譯,機構學,高立圖書,p259-p276,Feb. 1998。 [35] 蔣君宏,機構學,正中書局,p441-p444,中華民國75年一月初版。 [36] http://www.cmv.com.tw/tw/aboutlcd.asp(奇美實業) http://www.auo.com/auoDEV/about.php(友達光電) http://www.acer.com.tw/(宏碁) http://www.viewsonic.com.tw/ [37] 邱正茂、賴詩文、賴宏仁, “LCD-TV背光源的發展現況─誰能勝出,” 工業材料雜誌 221期, 94年5月。 [38] SPECIFICATIONS FOR NICHIA CHIP TYPE WHITE LED, MODEL:NSSW020BT, NICHIA. [39] OSRAM Micro SIDELED MODEL:LW Y1SG, OSRAM. [40] 鮑友南、姚柏宏、潘奕凱、林建憲, “TV用液晶顯示器之背光模組技術,” 機械工業雜誌 245期, 2002, 3月號。 [41] Vikuiti™ Dual Brightness Enhancement Film (DBEF), 3M. [42] E. Kukharenka, M. M. Farooqui, L. Grigore, M. Kraft and N. Hollinshead, “Electroplating moulds using dry film,” J. Micromech. Microeng. 13, S67–S74, 2003.
摘要: 本文探討滾壓式製程於中尺寸導光板之模擬與製程研究,藉由立體曝光微影技術,並搭配乾式光阻ORDYL P50120,可將傳統平面式的微結構陣列製程延伸至三度空間曲面,能在非平面(non-planar)基材表面製作大面積化的微結構陣列。並以光學模擬軟體TracePro3.3模擬15吋背光模組,在使用低於1W的消耗功率下,成功地模擬出使用40顆的高功率LED作為導光板光源,即可達到面板平均輝度為7000nit之需求。以此模擬搭配自行開發之製程技術,期許未來能對於平面顯示器產業之導光板生產有所助益。
This research investigates the simulation and fabrication process study of roller-pressing for mid-size light-guide plates fabrication. A three dimensional (3D) mold insert with micro-structure array using dry-film photoresist (ORDYL P50120) in lithography process was studied. It extended the conventional planar molding for large area light-guide plate fabrication to a 3D roller. The optical simulation (TracePro3.3) using the consuming power less than 1W high power LEDs was studied. The lighting source using 40 high power LEDs can achieve the average brightness 7000 nit. We hope it can benefit to rapidly light-guide plate fabrication and mass production in TFT-LCD industry by collocating the optical simulation and the developed fabrication process.
URI: http://hdl.handle.net/11455/4097
其他識別: U0005-1807200616243800
文章連結: http://www.airitilibrary.com/Publication/alDetailedMesh1?DocID=U0005-1807200616243800
Appears in Collections:精密工程研究所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.