Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/41106
DC FieldValueLanguage
dc.contributor.authorTseng, T.F.en_US
dc.contributor.author吳震裕zh_TW
dc.contributor.authorWu, J.Y.en_US
dc.date2009zh_TW
dc.date.accessioned2014-06-06T08:04:57Z-
dc.date.available2014-06-06T08:04:57Z-
dc.identifier.issn1932-7447zh_TW
dc.identifier.urihttp://hdl.handle.net/11455/41106-
dc.description.abstractIn our study, cationic colloidal silica was prepared using a silylation process to modify silica by chemically grafting it with (gamma-aminopropyl)trimethoxysilane (APS) under acidic conditions. The silylation of silica by APS grafting was characterized by FTIR and solid (29)Si NMR with its zeta potential measured for the confirmation of cationic nature for APS-modified silica (APS-silica). The strong electrostatic attraction of cationic APS-silica toward negatively charged Na(+)-montmorillonite (MMT) clay resulted in the formation of APS-silica/MMT nanohybrids during the mixing process. The coagulated nanohybrids acquired different charges depending on the weight ratios (WRs) of APS-silica to MMT in the nanohybrids. The surface potential of nanohybrids also varies with the amount of APS-silica imparted when measured using a zeta potential analyzer. Images obtained by transmission electron microscopy and field-emission scanning electron microscopy reveal the supracolloidal structure of the nanohybrids. APS-silica nanoparticles, with a diameter of 22 nm, were embedded in two-dimensional MMT arrays that are approximately 300 nm x 300 nm in size. The ordered structure of the nanohybrid was demonstrated in a small-angle X-ray scattering study. Also, the wide-angle X-ray diffraction of nanohybrids was employed to analyze the interlayer distance of MMT in nanohybrids. The precipitates of coagulated nanohybrids were separated from solution and weighed to yield the "coagulation efficiency" on the basis of the feeding weight of APS-silica and MMT. Coagulation efficiencies over 97.6% are obtained for WRs between 2 and 7. The calculation using coagulation-efficiency data gives a saturated WR of 8.1 that agrees with that of the theoretical packing of APS-silica nanoparticles covering the MMT surface. In addition to determining the ordered supracolloidal structure, this research also presents a novel method to exfoliate the 2D MMT nanoclay with 3D nano-APS-silica colloids by a self-assembly process through electrostatic attraction. A comparison of the Brunauer-Emmett-Teller surface area of MMT in nanohybrids with the theoretical packing of silica on MMT concludes the biased layout of silica colloids on MMT with partial overlapping and void development in the interstices of nanohybrids.en_US
dc.language.isoen_USzh_TW
dc.relationJournal of Physical Chemistry Cen_US
dc.relation.ispartofseriesJournal of Physical Chemistry C, Volume 113, Issue 30, Page(s) 13036-13044.en_US
dc.relation.urihttp://dx.doi.org/10.1021/jp9007043en_US
dc.subjectnanocompositesen_US
dc.subjectpolymeren_US
dc.subjectsurfactantsen_US
dc.subjectcompositesen_US
dc.subjectparticlesen_US
dc.subjectfilmsen_US
dc.titlePreparation and Structural Characterization of Novel Nanohybrids by Cationic 3D Silica Nanoparticles Sandwiched between 2D Anionic Montmorillonite Clay through Electrostatic Attractionen_US
dc.typeJournal Articlezh_TW
dc.identifier.doi10.1021/jp9007043zh_TW
Appears in Collections:化學工程學系所
文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.