Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/41585
標題: Preparation of polymer film of micro-porous or island-like structure and its application in dye-sensitized solar cell
作者: Chen, C.M.
陳志銘
Shiu, H.S.
Cheng, S.J.
Wei, T.C.
關鍵字: Polymers
Solar cells
Structural properties
Surface morphology
ionic liquid electrolyte
photovoltaic performance
conversion
efficiencies
gel electrolytes
tio2 electrodes
power
期刊/報告no:: Journal of Power Sources, Volume 188, Issue 1, Page(s) 319-322.
摘要: A polystyrene (PS) film of micro-porous or island-like structure has been prepared by spin-coating the PS-PMMA (polymethyl-methacrylate) blend on sputtered platinum electrode, followed by selectively dissolving PMMA out of the blend. The film forms either micro-porous or island-like structure depending on the blending proportion of PS to PMMA. After soaking with liquid electrolyte, this film can be utilized as gel polymer electrolyte for dye-sensitized solar cell to improve its durability because the evaporation rate of liquid electrolyte can be significantly reduced. As to the convenience of cell assembly, this polymer film can also serve as a spacer and effectively separate the photo-anode and counter electrode. In addition. we also find that the cell performance is affected significantly by the polymer blend concentration. An energy conversion efficiency of 4.58% can be obtained with 2 wt% PS-2 wt% PMMA blend proportion under AM 1.5, 1 Sun illumination. (C) 2008 Elsevier B.V. All rights reserved.
URI: http://hdl.handle.net/11455/41585
ISSN: 0378-7753
文章連結: http://dx.doi.org/10.1016/j.jpowsour.2008.10.138
Appears in Collections:化學工程學系所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.