Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/41761
標題: Electrochemical synthesis of polypyrrole within PMMA nanochannels produced by AFM mechanical lithography
作者: Chen, J.M.
蔡毓楨
Liao, S.W.
Tsai, Y.C.
關鍵字: conducting polymers
polypyrrole
nanowires
electropolymerization
AFM
lithography
atomic-force-microscope
dip-pen nanolithography
scanning-tunneling-microscopy
conducting polymers
microelectronic
devices
aqueous-solutions
c-60 molecules
fabrication
nanostructures
nanowires
期刊/報告no:: Synthetic Metals, Volume 155, Issue 1, Page(s) 11-17.
摘要: A novel approach for the fabrication of polypyrrole nanowires via electropolymerization within poly(methyl methacrylate) (PMMA) nanochannels on an indium tin oxide (ITO) substrate is reported. The nanochannels width and depth obtained by atomic force microscopy (AFM) mechanical lithography on PMMA coated ITO substrate are about 150 and 35 nm. The nanochannels act as templates for electropolymerization of polypyrrole nanowires. The morphology of PMMA nanochannels and polypyrrole nanowires were investigated by AFM. The polypyrrole nanowires are around 350 nm in width and 20 mu m in length. The conducting properties of polypyrrole nanowires were identified by AFM with a conducting tip (CT-AFM). The AFM current image shows that the current difference can be distinguished between doped polypyrrole nanowires and PMMA thin film. The present methodology demonstrates the feasibility and effectiveness of electropolymerization of polypyrrole nanowires within PMMA nanochannels produced by AFM mechanical lithography. (C) 2005 Elsevier B.V. All rights reserved.
URI: http://hdl.handle.net/11455/41761
ISSN: 0379-6779
文章連結: http://dx.doi.org/10.1016/j.synthmet.2005.05.013
Appears in Collections:化學工程學系所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.