請用此 Handle URI 來引用此文件: http://hdl.handle.net/11455/43606
標題: Analysis of interfacial shear strength of SiC fiber reinforced 7075 aluminum composite by pushout microindentation
作者: 張守一
Chen, L.G.
Lin, S.J.
Chang, S.Y.
關鍵字: silver matrix composites
stress
ti
期刊/報告no:: Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, Volume 36A, Issue 7, Page(s) 1937-1945.
摘要: The interfacial shear strength of continuous silicon carbide fiber reinforced 7075 aluminum matrix composite (SiCf/7075AI) has been investigated in this research by pushout microindentation. The SiCf/7075AI composite specimens were processed by diffusion bonding alternate layers of SiC fibers and 7075AI alloy plates. From the measured stress-displacement curves of indentation tests, the interfacial shear strengths of the composite specimens were obtained, and the stress-displacement curves were basically divided into two regions: (1) elastic deformation and (2) interface decohesion and fiber sliding. With increasing aging time, the interfacial shear strength of the composite increased to 167 MPa for T6-treated specimens, and the variation of the interfacial shear strength well followed that of the ultimate tensile strength of 7075AI matrix alloy. With decreasing specimen thickness, the interfacial shear strength of the composite and the amplitude of stress fluctuation slightly decreased because of the stress relaxation effect near specimen surfaces. Under higher indentation velocities, both the interfacial shear strength and the amplitude of stress fluctuation became smaller.
URI: http://hdl.handle.net/11455/43606
ISSN: 1073-5623
文章連結: http://dx.doi.org/10.1007/s11661-005-0057-8
顯示於類別:材料科學與工程學系

文件中的檔案:
沒有與此文件相關的檔案。


在 DSpace 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。