Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/44199
標題: The electro-mechanical transfer function of an ultrasonic wheel system
作者: Juang, P.A.
林俊良
Lin, C.L.
莊禮鴻
關鍵字: Ultrasonic wheel system
Energy transformation
Dynamic deformation
behaviors
flat rigid surface
motors
vibration
dynamics
期刊/報告no:: Measurement, Volume 42, Issue 9, Page(s) 1417-1425.
摘要: This paper deals with the electro-mechanical transfer functions of an ultrasonic wheel system. The objective is to initiate a mode that can produce certain relative dynamic responses in the proposed ultrasonic wheel system. The performance will be parameterized by system inputs in an attempt to obtain an optimal operational configuration. The electromechanical transfer function model of the piezoelectric ultrasonic wheel based on the lateral elliptical motion is derived for the control application and certification of its load-characteristic parameters and also predicts the wheel system performance. On this basis, we can determine whether the output of the wheel system will be stable. The contact-dynamics behaviors of the stator are also studied. These derived formulations in this paper are based on the general concept of the constitutive laws governing piezoelectric materials which permit the introduction of kinetic energy, electrical energy, and geometric constraints relating to the deformation variables. (C) 2009 Elsevier Ltd. All rights reserved.
URI: http://hdl.handle.net/11455/44199
ISSN: 0263-2241
文章連結: http://dx.doi.org/10.1016/j.measurement.2009.06.003
Appears in Collections:電機工程學系所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.