Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/44959
標題: Capacitive micro pressure sensors with underneath readout circuit using a standard CMOS process
作者: Dai, C.L.
戴慶良
Chang, S.C.
Lee, C.Y.
Cheng, Y.C.
Chang, C.L.
Chiou, J.H.
Chang, P.Z.
關鍵字: capacitive micropressure sensor
a single chip
CMOS
readout circuit
期刊/報告no:: Journal of the Chinese Institute of Engineers, Volume 26, Issue 2, Page(s) 237-241.
摘要: A capacitive micropressure sensor with readout circuits on a single chip is fabricated using commercial 0.35 mum complementary metal oxide semiconductor (CMOS) process and post-processing. The main break through feature of the chip is the positioning of its readout circuits under the pressure sensor, allowing the chip to be smaller. Post-processing included anisotropic dry etching and, wet etching to remove the sacrificial layer, and the use of plasma enhanced chemical vapor deposition (PECVD) of nitride to seal the etching holes on the pressure sensor. The readout circuit is divided into analog and digital parts, with the digital part being an alternate coupled RS flip-flop with four inverters that sharpened the output wave. The analog part employed switched capacitor methodology. The pressure sensor contained an 8x8 sensing cells array, and the total area of the pressure sensor chip is 2mmx2mm.
URI: http://hdl.handle.net/11455/44959
ISSN: 0253-3839
文章連結: http://dx.doi.org/10.1080/02533839.2003.9670774
Appears in Collections:機械工程學系所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.