Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/45608
標題: Removal of acetone and methylacetate mixtures from waste gases by a trickle-bed air biofilter
作者: Lu, C.
盧重興
Lin, M.R.
Wey, I.
關鍵字: biofiltration
trickle-bed air biofilter
acetone
methylacetate
influent carbon loading
elimination capacity
btex
biofiltration
performance
loadings
期刊/報告no:: Environmental Technology, Volume 23, Issue 3, Page(s) 243-252.
摘要: The biofilter process is a relatively new technology that has been proven more cost-effective than traditional technologies for treating low-strength and some high-strength volatile organic compounds (VOCs) from waste gases. Acetone (AT) and methylacetate (MA) mixtures are commonly encountered from the manufacture of artificial rubber or polyurethane resin. This research attempts to employ a trickle-bed air biofilter (TBAB) for treating AT and MA mixtures under different influent carbon loadings. In the pseudo-steady-states, the elimination capacities of AT and MA increased but the removal efficiencies decreased with increased influent carbon loading. The removal efficiencies of MA were higher than those of AT showing that MA is a preferred substrate in the ATMA waste gas and the differences were enhanced at a high carbon loading. Greater than 95% AT removal and nearly complete MA removal were achieved with influent carbon loadings of AT and MA below 20 and 27 g m(-3) h(-1), respectively. The TBAB appears very efficient for treating ATMA emission with low to medium carbon loadings.
URI: http://hdl.handle.net/11455/45608
ISSN: 0959-3330
文章連結: http://dx.doi.org/10.1080/09593332508618417
Appears in Collections:環境工程學系所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.