Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/46600
標題: Geometric functions of stress intensity factor solutions for spot welds in U-shape specimens
作者: Lin, P.C.
王東安
Wang, D.A.
關鍵字: Spot weld
U-shape specimen
Stress intensity factor
Geometric
functions
Fatigue
lap-shear specimens
fatigue life estimations
form structural stress
friction welds
loading conditions
kinked cracks
failure modes
behavior
prediction
parameters
期刊/報告no:: International Journal of Solids and Structures, Volume 47, Issue 5, Page(s) 691-704.
摘要: In this paper, the stress intensity factor solutions for spot welds in U-shape specimens are investigated by finite element analyses. Three-dimensional finite element models are developed for U-shape specimens to obtain accurate stress intensity factor solutions. In contrast to the existing investigations of the stress intensity factor solutions based on the finite element analyses, various ratios of the sheet thickness, half specimen width, half specimen length, and corner radius to the nugget radius are considered in this investigation. The computational results confirm the functional dependence on the nugget radius and sheet thickness of Zhang's analytical solutions. The computational results provide a geometric function in terms of the normalized half specimen width, normalized half specimen length, and normalized corner radius to Zhang's analytical solutions. The computational results also provide a geometric function in terms of the aspect ratio of the specimen to complete Lin and Pan's analytical solution. Finally, based on the analytical and computational results, the dimensions of U-shape specimens are suggested. (C) 2009 Elsevier Ltd. All rights reserved.
URI: http://hdl.handle.net/11455/46600
ISSN: 0020-7683
文章連結: http://dx.doi.org/10.1016/j.ijsolstr.2009.11.007
Appears in Collections:精密工程研究所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.