Please use this identifier to cite or link to this item:
|標題:||Photoelectrocatalytic Degradation of Sodium Oxalate by TiO2/Ti Thin Film Electrode|
|期刊/報告no：:||International Journal of Photoenergy.|
|摘要:||The photocatalytically active TiO2 thin film was deposited on the titanium substrate plate by chemical vapor deposition (CVD) method, and the photoelectrocatalytic degradation of sodium oxalate was investigated by TiO2 thin film reactor prepared in this study with additional electric potential at 365nm irradiation. The batch system was chosen in this experiment, and the controlled parameters were pH, different supporting electrolytes, applied additional potential, and different electrolyte solutions that were examined and discussed. The experimental results revealed that the additional applied potential in photocatalytic reaction could prohibit recombination of electron/hole pairs, but the photoelectrocatalytic effect was decreased when the applied electric potential was over 0.25 V. Among the electrolyte solutions added, sodium sulfate improved the photoelectrocatalytic effect most significantly. At last, the better photoelectrocatalytic degradation of sodium oxalate occurred at pH3 when comparing the pH influence.|
|Appears in Collections:||期刊論文|
Show full item record
TAIR Related Article
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.