Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/95513
標題: Grain Size in Aluminum Alloy 6061 under Hot Ring Compression Test and after T6 Temper
作者: 范光堯
Kuang-Jau Fann
Chun-Chi Chen
關鍵字: peripheral coarse grain
aluminum alloy
hot forging
aging
ring compression test
出版社: APPLIED SCIENCES-BASEL
摘要: Peripheral coarse grain during and after hot forming is often a major inconvenience for manufacturing aluminum alloy parts. Not only is the strength reduced, but the subsequent surface treatments are also hard to realize. The literature has shown that peripheral coarse grain is very likely induced by the previous process, such as extrusion. To investigate if peripheral coarse grain could be caused solely by hot forming, this study removed the billet surface layers. This eliminates the effect from the previous processes preparing the billets and forms ring specimens for executing ring compression test. The ring compression test can reveal the friction circumstance of the specimen to the die surface and create versatile deformation in the specimens to simulate forging situations, thereby providing multifaceted conditions to develop diverse grain size in specimen, particularly on its surface. The experiments were designed and analyzed under the Taguchi method, with consideration for factors such as working temperature, speed and amount of compression, and lubricant. Under each experiment, no peripheral coarse grains were found in the specimen, which were peeled and compressed, and even the average grain size after compression test is larger than that of the received billet. No peripheral coarse grains were found in the subsequent T6 temper either, which could, however, refine the grains.
URI: http://hdl.handle.net/11455/95513
文章連結: https://www.mdpi.com/2076-3417/7/4/372
Appears in Collections:機械工程學系所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.