Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/99178
標題: Reuse of bottom ash and fly ash from mechanical-bed and fluidized-bed municipal incinerators in manufacturing lightweight aggregates
作者: Kui-Hao Chuang
Chien-Hsing Lu
Jyh-Cherng Chen
Ming-Yen Wey
魏銘彥
關鍵字: Lightweight aggregates
Municipal solid waste
Fly ash
luidized-bed incinerator
摘要: This study involved the reuse of residues, including fly ash (FA) and bottom ash (BA), from municipal solid waste (MSW) incineration and reservoir sediment (RS) to make lightweight aggregates (LWAs) and to evaluate the effects of the incinerator type, material mixing ratio, and preparation conditions on the properties of the resulting aggregates. The MSW incineration ashes were mixed in three different ratios (65% BA + 15% FA, 70% BA + 10% FA, and 75% BA + 5% FA) with reservoir sediment and were sintered at temperatures of 950–1050 °C. The ash samples were obtained from an incineration plant equipped with fluidized-bed (FB) and mechanical-bed (MB) furnaces. The ash from the FB incinerator could be turned into LWAs at a relatively low temperature (1000 °C). Compressive strength measurements indicated that these aggregates were stronger than those manufactured using the ash from the MB incinerator. The BA and FA from the FB incinerator showed good chemical stabilities due to the operating conditions of the incinerator, suggesting that they are suitable for fabricating LWAs. Thus, the thermal synthesis of LWAs from mixtures of incineration residue and RS is a highly effective method for the recycling/disposal of MSW incinerator ash.
URI: http://hdl.handle.net/11455/99178
文章連結: https://www.sciencedirect.com/science/article/pii/S0272884218309386
Appears in Collections:環境工程學系所

文件中的檔案:

取得全文請前往華藝線上圖書館



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.