Please use this identifier to cite or link to this item:
DC FieldValueLanguage
dc.contributor.authorYing Mazh_TW
dc.contributor.authorFu-I Chouzh_TW
dc.contributor.authorPo-Yuan Yangzh_TW
dc.contributor.authorJinn-Tsong Tsaizh_TW
dc.contributor.authorZhen-Yu Yangzh_TW
dc.contributor.authorJyh-Horng Chouzh_TW
dc.description.abstractA genetic algorithm and Taguchi method were used to optimize parameters for the residual-current device (RCD) snubber circuit of a DC-DC flyback converter. The most suitable algorithm was determined by using test functions to compare performance in three multi-objective optimization methods: non-dominated sort genetic algorithm-II (NSGA-II), multi-objective particle swarm optimization (MOPSO), and multi-objective differential evolution algorithm (MODE). Comparisons of coverage rate, distance between non-dominant solutions, and maximum walking distance showed that NSGA-II was superior to both MOPSO and MODE. Therefore, NSGA-II was used to obtain parameter values for the RCD snubber circuit. However, practical application of the parameter values was limited because the values could not meet the specifications required for real-world circuits. Thus, the parameter values obtained by NSGA-II were used in further factor-level experiments performed by Taguchi method. The experimental results indicated that, compared to previous design methods, the proposed NSGA-II and Taguchi method obtains better parameter values for the RCD snubber circuit.zh_TW
dc.subjectMulti-objective optimizationzh_TW
dc.subjectTaguchi methodzh_TW
dc.subjectRCD snubber circuitzh_TW
dc.titleOptimal Parameter Design by NSGA-II and Taguchi Method for RCD Snubber Circuitzh_TW
dc.typejournal articlezh_TW
item.openairetypejournal article-
item.fulltextwith fulltext-
Appears in Collections:機械工程學系所
Files in This Item:
File Description SizeFormat
367.pdf2.4 MBAdobe PDFView/Open
Show simple item record

Google ScholarTM


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.