Please use this identifier to cite or link to this item:
標題: 單軸長行程奈米定位系統之研究
A Study on Long-Range Single-Axis Nanometer Positioning System
作者: 侯思吉
Wijaya, Martinus Tony
關鍵字: nanometer positioning;奈米定位;feeding mechanism;piezoelectric actuator;two-stage control;fuzzy control;feedback-feedforward control;進給機構;壓電致動器;二階段式控制;模糊控制;回授-前饋控制
出版社: 機械工程學系所
引用: [1] Yang, J. S., “A Study on the Design of the Driving Mechanism for a Precision Feeding System,” M.S. Thesis, Department of Mechanical Engineering of National Chung Hsing University, Taichung, Taiwan, 2004. [2] Higuchi, T., Yamagata, Y., Furutani, K., and Kudoh, K., “Precise Positioning Mechanism Utilizing Rapid Deformations of Piezoelectric Elements,” Proceedings of the IEEE MEMS Workshop, pp. 222-226, February 11 - 14, 1990. [3] Ling, S. F., Du, H., and Jiang, T., “Analytical and Experimental Study on a Piezoelectric Linear Motor,” Smart Materials and Structures, Vol. 7, No. 3, pp. 382-388, June 1998. [4] Furutani, K., Higuchi, T., Yamagata, Y., and Mohri, N., “Effect of Lubrication on Impact Drive Mechanism,” Precision Engineering, Vol. 22, No. 2, pp. 78-86, 1998. [5] Tzen, J. J., “Precise Positioning Using Piezoelectric Actuators,” Ph.D. Dissertation, Department of Mechanical Engineering of National Chiao Thung University, Hsin-Chu, Taiwan, 2002. [6] Tsai, M. S., Lee, C. H., and Hwang, S. H., “Dynamic Modeling and Analysis of Bimodal Ultrasonic Motor,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 3, No. 3, pp. 245-256, March 2003. [7] Almeida, V. A. L. de, Eiras, J. A., and Ibrahim, R. C., “A Novel Type of Piezoelectric Minimotor for Linear Displacements,” IEEE Symposium on Ultrasonics, Vol. 2, pp. 1774-1777, October 5 - 8, 2003. [8] Hashimoto, S., Ohishi, K., Ohishi T., Ishikawa, T., Kosaka, K., Egashira, Y., Kubota, H., and Ohmi, T., “Development of an Ultra-Precision Stage Control System Using Nonresonant Ultrasonic Motor,” The 29th Annual Conference of the IEEE Industrial Electronics Society, Vol. 2, pp. 1331-1336, November 2 - 6, 2003. [9] Hashimoto, H., Hino, N., Ohyama, Y., Niitsuma, M., and Ishii, C., “Positioning Control of the Finger Tip Drive Type of Linear Stage Using Disturbance Observer,” The 30th Annual Conference of the IEEE Industrial Electronics Society, Busan, Korea, November 2 - 6, 2004. [10] Nanomotion Ltd., Available on website: <> (visited on May 12, 2006). [11] Pahl, G. and Beitz, W., Engineering Design: A System Approach, 2nd edition, Springer-Verlag, New York, 1996. [12] Moura, E. C., “TOC Trees Help TRIZ,” The TRIZ Journal, September, 1999, Available on website: <> (visited on December 12, 2005). [13] Paros, J. M. and Weisbord, L., “How to Design Flexure Hinge”, Machine Design, Vol. 37, pp. 151-157, November 25, 1965. [14] Goldfarb, M. and Speich, J., “A Well-Behaved Revolute Flexure Joint for Compliant Mechanism Design, ” ASME Journal of Mechanical Design, Vol. 121, No. 3, pp. 424-429, 1999. [15] Kang, B. H., Wen, J. T. Y., Dagalakis, N. G.., and Gorman, J. J., “Analysis and Design of Parallel Mechanism with Flexure Joints,” IEEE Trans. on Robotics, Vol. 21, Issue 6, pp. 1179-1185, December 2005. [16] Fu, S. T., “Optimal Design and Characterization of a Nanometer Positioning Stage,” M.S. Thesis, Department of Mechanical Engineering of National Chung Hsing University, Taichung, Taiwan, 2001. [17] Moon, Y. M., Trease, B. P., and Kota, S., “Design of Large Displacement Compliant Joints”, Proceeding of the 27th Biennial Mechanisms and Robotics Conference, Montreal, Canada, September 29 - October 3, 2002. [18] Zadeh, L. A., “Fuzzy Sets,” Information Control, vol. 8, pp.338-353, 1965. [19] Mamdani, E. H., “Applications of Fuzzy Algorithms for Control of Simple Dynamic Plants,” Proceedings of the IEE, vol. 121, pp. 1585-1588, 1974. [20] Takagi, T. and Sugeno, M., “Fuzzy Identification of Systems and Its Application to Modeling and Control,” IEEE Transactions on System, Man, and Cybernetics, Vol. 15, No. 1, pp. 116-132, January 1985. [21] Wang, L. X., A Course in Fuzzy Systems and Control, Prentice Hall, New Jersey, 1997. [22] Lee, C. C., “Fuzzy logic in control systems: Fuzzy logic controller-Part 1,” IEEE Transactions on System, Man, and Cybernetics, vol. 20, pp. 404-418, April 1990. [23] Li, Y. F., and Lau, C. C., “Development of Fuzzy Algorithms for Servo Systems,” IEEE Control System Magazine, vol. 9, pp. 65-72, April 1989. [24] Chen, C. M., “Fuzzy Modeling and Control for a Precision Driving System with Friction Compensation,” M.S. Thesis, Department of Mechanical Engineering of National Chung Hsing University, Taichung, Taiwan, 2001. [25] Ge, P. and Jouaneh, M., “Tracking Control of a Piezoceramic Actuator,” IEEE Transactions on Control Systems Technology, Vol. 4, No. 3, May 1996. [26] Tuglie, E. D., Patrono. G., and Toreli, F., “An Extension of Feedback-Feedforward Technique to Input-Output Feedback Linearization,” IEEE Proceeding of the PES Power Systems Conference and Exposition, vol. 2, pp. 1119-1126, October 10 - 13, 2004. [27] Gere, J. M., Mechanics of Materials, 5th edition, Brooks/Cole, 2001. [28] Idogaki, T., Kanayama, H., Ohya, N., Suzuki, H., and Hattori, T., “Characteristics of Piezoelectric Locomotive Mechanism for an In-Pipe Micro Inspection Machine,” Proceedings of the International Symposium on Micro Machine and Human Science, October 1995. [29] Tzeng, Y. M., Engineering Dynamics, First Edition, Ding Mao, Taipei, 2001. [30] Rivals, I. and Personnaz, L., “Internal Model Control Using Neural Networks,” Proceedings of the IEEE International Symposium on Industrial Electronics, Warsaw, June 17 - 20, 1996. [31] Constantin, N., “Predictive Control Based on Multimodel Estimation,” Studies in Informatics and Control, Vol. 13, No. 2, June 2004. [32] Bittanti, S. and Campi, M., “Bounded Error Identification of Time-Varying Parameters by RLS Techniques,” IEEE Transactions on Automatic Control, Vol. 39, No. 5, May 1994. [33] Astrom, A. and Wittenmark, B., Adaptive Control, Addison-Wesley, 2nd edition, 1994. [34] Physic Instrumente, Nano Positioning, U.S. Edition Catalog, 1998. [35] Huang, Y. Z. and Dong, S. Y., TMS320C240 Theory and Application with C Language, First Edition, Literature Number: DMA-A235, Dmatek, Taichung, July 1992. [36] Texas Instruments, TMS320F/C240 DSP Controllers Reference Guide, Literature Number: SPRU161C, June 1999.
本研究主要目的是要改善單軸定位系統之機構設計以及控制,使此定位平台具有行程100 mm之要求。定位平台是由線性滑軌、進給機構及三根堆疊式壓電致動器所組合而成。精密定位系統主要是利用壓電致動器驅動進給機構,使它產生週期性的圓周運動並利用摩擦方式來撥動滑軌之表面。藉由此連續進給的方式來達成長行程精密定位之目標。另外,研究中利用Current Reality Tree理論方法來針對楊[1]所設計之進給機構之核心問題,產生一個新的設計概念,以解決現存問題。


本研究利用TMS320F240 DSP單晶片控制面版配合控制法則來控制定位平台。從實驗結果可得,定位平台的行程可以超過90 mm,平台的最高速度為 5.8 mm/s,而平均速度為 1 mm/s。定位的穩態誤差峰對峰值小於20 nm;偏差量小於0.5 nm,以及振動幅度(1σ)小於7 nm。

This study is focusing on the improvement design and control of a long-range single-axis positioning system, which has a travel range of 100 mm. The positioning system was constructed by a linear guide, a feeding mechanism and three stacked piezoelectric actuators. The stacked piezoelectric actuators were used to drive the feeding mechanism with a circular movement, which will feed the linear guide by friction force. Through continuous feeding, an unlimited travel range positioning system can be achieved. A Current Reality Tree design methodology was used to create a new conceptual design and to solve the core problems embedded in the feeding mechanism system proposed by Yang [1].

For control system, two-stage control strategy was introduced for the positioning control, i.e. coarse motion control and fine motion control. At coarse motion stage, impact-drive motion combined with fuzzy control was used to accelerate the linear guide to approach the target position. At fine motion stage, stick-drive motion combined with classical feedback-feedforward control can provide a nanometer positioning accuracy.

The control algorithm was implemented on TMS320F240 DSP-based control board, and the experiment results show that the proposed feeding mechanism system with two-stage control strategy can achieve a travel range more than 90 mm with maximum velocity of 5.8 mm/s, average velocity 1 mm/s, steady state error is less than 20 nm, positioning bias is less than 0.5 nm and standard deviation is less than 7 nm.
其他識別: U0005-1707200615594300
Appears in Collections:機械工程學系所

Show full item record
TAIR Related Article

Google ScholarTM


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.