Please use this identifier to cite or link to this item:
標題: 可調式減振搪刀桿之性能研究
A Study on the Performance of an Adjustable Vibration-Reduction Boring Bar
作者: 呂智偉
關鍵字: chatter;顫振;vibration-reduction boring bar;system identification;statistical regression;減振搪刀桿;系統辨識;統計迴歸
出版社: 機械工程學系所
引用: 【王栢村,1997】 王栢村,1997,振動學,全華科技圖書股份有限公司。 【王詠傑,2005】 王詠傑,2005,應用於車削的主動式減振控制的壓電致動刀具設計,私立逢甲大學機械工程研究所碩士論文。 【王等人,2005】王栢村、趙志燁、吳建德,1999年,“應用實驗模態分析於高爾夫球頭素料之材料性質測定,”國立屏東科技大學學報,V ol. 8,311-317頁。 【林建宏,2003】 林建宏,2003,磁流變液車刀減振器設計分析,國立台灣科技大學機械工程研究所碩士論文。 【陳順宇,1997】 陳順宇,1997,迴歸分析,華泰書局。 【莊集黃,2005】 莊集黃,2005,減振刀桿之可行研究,國立中興大學械工程研究所碩士論文。 【集研科技,2000】集研科技,2000,集研科技儀器說明手冊,集研科技有限股份公司。 【日本ばね技術研究會,1996】日本ばね技術研究會編著,賴耿陽譯,1996,彈簧之設計與製造,復漢出版社。 【Andreassen et al., 1974】L. Andreassen, G. Rosdal and H. K. Holmen, 1974, “Adjustable Damping Device in Particular for Boring Bar and the Like,” U.S. Patent No. 3,838,936. 【Andreassen, 1995】L. Andreassen, 1995, “Means for damping vibrations, for example self-generated oscillations in boring bars and similar,” U.S. Patent No. 5,413,318. 【Arnold, 1946】R. N. Arnold, 1946, “The Mechanism of Tool Vibration in the Cutting of Steel,” Proceedings of the Institution of Mechanical Engineers, Vol. 154, pp.261. 【Baek et al , 1997】D. K.Baek, T. J. Ko. and H. S. Kim, 1997, “A dynamic surface model for face milling,” Precision Engineering, Vol. 20, pp. 171-178. 【Cobb, 1997】W. T. Cobb, 1997, “Tuned Damping System for Suppressing Vibrations During Machining,” U.S. Patent No. 5,700,116. 【Comstock et al, 1968】 T. R. Comstock , F. S. Tse and J. R. Lemon, 1968 , “Dynamic control of vibration and chatter in machine tools,” Machinery, Vol. 121 , pp.102-103. 【Dalenbring, 1999】M. Dalenbring, 1999, “Damping function estimation based on measured vibration frequency responses and finite-element displacement modes,” Mechanical System and Signal Processing, Vol. 13, No. 4, pp. 547-569. 【Edhi & Hoshi, 2001】E. Edhi and T. Hoshi, 2001, “Stabilization of High Frequency Chatter Vibration in Fine Boring by Friction Damper,” Journal of the International Societies for Precision Engineering and Nanotechnology, Vol. 23, pp. 224-234. 【Ema & Marui, 1996】S. Ema and E. Marui, 1996, “Damping Characteristics of an Impact Damper and Its Application,” International Journal of Machine Tools & Manufacture, Vol. 36, No. 3, pp. 293-306. 【Ema & Marui, 2000】 S. Ema and E. Marui, 2000, “Suppression of Chatter Vibration of Boring Tools Using Impact Dampers,” International Journal of Machine Tools & Manufacture, pp. 1141-1156. 【Etling & Stern, 2002】S. A. Etling and E. L. Stern, 2002, “Tunable Boring Bar for Suppressing Vibrations and Method There of,” U.S. Patent No. 6,443673. 【Fitzgerald et al., 1985】G. W. Fitzgerald, R. S. Gulibon and P. M. Penrod, 1985, “Boring Tool and Method of Reducing Vibrations Therein,” U.S. Patent No. 4,553,884. 【Hartog, 1956】 J. P. Hartog, 1956, Mechanical Vibrations, New York: McGraw-Hill, fourth edition. 【Hunt, 1991】G. E. Hunt, 1991, “Vibration Dampened Boring Bar,” U.S. Patent No. 4,998,851. 【Jemielniak & Widota, 1984】K. Jemielniak and A. Widota, 1984, “Suppression of self -excited vibration by the spindle speed variation method,” International Journal of Machine Tool Design and Research , Vol. 24, pp. 207 - 214. 【Lee et al., 2001】 E. C. Lee, C. Y. Nian and Y. S. Tarng, 2001, “Design of a Dynamic Vibration Absorber Against Vibrations in Turning Operations,” Journal of Materials Processing Technology, Vol. 108, pp. 278-285. 【Lee et al., 2003】Dai Gil Lee, Hui Yun Hwang and Jin Kook Kim, 2003, “Design and manufacture of a carbon fiber epoxy rotating boring bar,” Composite Structures, Vol. 60, pp. 115–124. 【Lewis, 1955】F. M. Lewis, 1955, “The Extended Theory of the Viscous Vibration Damper,” Journal of Applied Mechanics, Vol. 32, pp. 377-382. 【Li et al., 2003】C. J. Li, A. G. Ulsoy and W. J. Endres, 2003, “The Effect of Flexible-Tool Rotation on Regenerative Instability in Machining,” ASME Journal of Manufacturing Science and Engineering, Vol. 125, pp. 39-47. 【Liu & Liu, 1985】C. Liu and T. Liu, 1985, “ Automated chattersuppression by tool geometry control,” Journal of Engineering for Industry, Vol. 107, pp.95 - 98. 【Mao et al., 2004】Kuanmin Mao, Michael Yu Wang1, Zhiwei Xu and Tianning Chen, 2004, “Simulation and Characterization of Particle Damping in Transient Vibrations,” Journal of Vibration and Acoustics, Vol. 126, pp. 202-211. 【Marui et al., 1998】E. Marui, S. Ema, M. Hashimoto and Y. Wakasawa, 1998, “Plate Insertion as a Means to Improve the Damping Capacity of a Cutting Tool System,” International Journal of Machine Tools & Manufacture, Vol. 38, pp.1209-1220. 【Merritt, 1965】H. E. Merritt, 1965, “Theory of Self-Excited Machine-Tool Chatter,” Journal of Engineering for Industry, Vol. 87, pp. 447-454. 【Morgan & Wang, 2002】R. A. Morgan and K. W. Wang, 2002, “An Active-Passive Piezoelectric Absorber for Structural Vibration Control Under Harmonic Excitations with Time-Varying Frequency, Part 2 Experimental Validation and Parametric Study,” ASME Journal of Vibration and Acoustics, Vol. 124, pp. 84-89. 【Ozel & Altan, 2000】T. Ozel and T. Altan, 2000, “Process simulation using finite element method: prediction of cutting forces, tool stresses and temperatures in high-speed flat end milling.,” International Journal of Machine Tools and Manufacture, Vol. 40, pp. 713-738. 【Shurtliff, 1986】N. E. Shurtliff, 1986, “Damped Boring Bar and Tool Holder,” U.S. Patent No. 4,616,738. 【Tarng et al., 2000】Y. S. Tarng, J. Y. Kao and E. C. Lee, 2000, “Chatter Suppression in Turning Operations with a Tuned Vibration Absorber,” Journal of Materials Processing Technology, Vol. 105, pp. 55-60. 【Tewani et al., 1995】S. G. Tewani, K. E. Rouch and B. L. Walcott, 1995, “A Study of Cutting Process Stability of a Boring Bar with Active Dynamic Absorber,” International Journal of Machine Tools & Manufacture, Vol. 35, No. 1, pp. 91-108. 【Thompson et al., 1980】A. G. Thompson, 1980, “Auxiliary Mass Throw in a Tuned and Damped Vibration Absorber,” Journal of Sound and Vibration, Vol. 70, pp. 481-486.
經系統辨識實驗,本研究之可調式減振搪刀桿之刀桿阻尼C與壓縮旋置量x之模式為C=-0.029x3+0.407x2-2.20x+12.4,此模式再經壓縮旋置量於0.5mm、2.5mm及4.5mm時驗證,模式之平均誤差在2%以內;刀桿剛性K與壓縮旋置量x之模式為K=303x3-1940x2+8890x +181000,經驗證其平均誤差在1%以內。減振器之阻尼C2=-0.026x3+0.351x2-1.726x+4.186,經驗證其平均誤差在5%以內;減振器剛性模式K2=121x3-932x2+4650x+4550,其驗證之平均誤差在7%以內,顯示本研究之方法適用於此一可調式減振搪刀桿之剛性與阻尼特性評估。

Vibration is one of the factors that affect the machining quality. Among many items, chatter is the most difficult item to control in vibration. It not only effect the life of machine tool and manufacturing quality but let manufacturer feel unwell for producing noise.This study is intended to investigate the system properties of an adjustable vibration-reduction boring bar. We first analyzed the structure and model of various vibration-reduction tool holders. The vibration characteristics, including the damping and the stiffness, and their relationship to the compression displacement of the adjustable vibration-reduction boring bar are then investigated via system identification approach. Models for damping and stiffness are then constructed based on experimental data with statistical regression by the analysis of variation. Further experiments are then conducted to verify these models.
The relationship between the damping C and the compression displacement x of the boring bar by this approach is identified as C=-0.029x3+0.407x2-2.20x+12.4. This model is further verified with average errors less than 2% at compression displacements 0.5mm, 2.5mm and 4.5mm. The stiffness K is identified as K=303x3-1940x2+8890x +181000 with average verification errors less then 1%. The damping of vibration-reduction system C2 is identified as -0.026x3+0.35x2-1.73x+4.19 with average verification errors less then 5%. The stiffness of vibration-reduction system K2 is identified as 121x3-932x2+4650x+4550 with average verification errors less then 7%. It concludes that the approach and models of the study are suitable to evaluate the damping and the stiffness of the adjustable vibration-reduction boring bar.
其他識別: U0005-2508200814333100
Appears in Collections:機械工程學系所

Show full item record
TAIR Related Article

Google ScholarTM


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.