Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/2237
標題: 國內應用彈性製造系統之製造成本模式研究
A case study for manufacturing cost model of Flexible Manufacturing System (FMS) in Taiwan
作者: 許原昇
關鍵字: manufacturing cost;製造成本;FMS;cost model;彈性製造系統;成本模式
出版社: 機械工程學系
摘要: 
製造業之競爭優勢為成本降低與品質保證。如何兼顧品質與成本,是目前業界努力的共同方向。若能有效預估成本,進而控制成本提升競爭力,將對業界有所裨益。
本研究藉由探討彈性製造系統中,生產製造與單位工件成本間之關係,推導出適用於彈性製造系統運作特性的製造成本模式,並依國內彈性製造系統廠商之各類成本資料,驗證所推導的模式且予以修正。對於估算FMS之製造成本,提出了一種有效的方法。
運用本文推導的製造成本模式估計,預估成本與實際成本誤差值介於0.1%至11%之間,證實生產閒置所造成的成本應一併納入製造成本中計算,並且清楚瞭解本研究各項成本因子在單位工件製造成本的比例。

It is the competitive advantage of the manufacturing industry that leads to cost reduction and quality assurance. Therefore, at present, the main objective of the manufacturing industry is to take quality and cost into account at the same time. It will be profoundly beneficial for the manufacturing industry to enhance competition if the cost can be predicted and further under control.
The study focuses on the relationship between production manufacturing and unit cost in the area of flexible manufacturing system (FMS) in order to generate a manufacturing cost model which can be applied to the FMS. Moreover, according to various cost data of domestic FMS firms, the model will be examined and then modified. In addition, the study proposes an effective method to estimate the manufacturing cost as far as the FMS is concerned.
The model also exhibites that the residual between estimated cost and real cost is in the range of 0.1% and 11%, which shows that the cost resulted from idle production should be incorporated into the manufacturing cost. Eventually, the research highlights the proportion of each cost factor in the unit manufacturing cost.
URI: http://hdl.handle.net/11455/2237
Appears in Collections:機械工程學系所

Show full item record
 
TAIR Related Article

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.