Please use this identifier to cite or link to this item:
|標題:||A low humidity sensor made of quartz crystal microbalance coated with multi-walled carbon nanotubes/Nafion composite material films||作者:||Su, P.G.
|關鍵字:||low humidity sensor;quartz crystal microbalance;composite material;CNTs (SWCNTs and MWCNTs);Nafion;adsorption dynamic analysis;field-effect transistors;adsorption||Project:||Sensors and Actuators B-Chemical||期刊/報告no：:||Sensors and Actuators B-Chemical, Volume 115, Issue 1, Page(s) 338-343.||摘要:||
A low humidity sensor was made of a quartz crystal microbalance (QCM) coated with multi-walled carbon nanotubes/Nafion (MWCNTs/Nafion) composite material films. The microstructure of the MWCNTs/Nafion composite material films showed strong interaction between MWCNTs and Nafion. The MWCNTs/Nafion composite material films coated on the gold electrode of QCM showed excellent sensitivity (3.56-Delta HZ/Delta ppm(v) at 23.4 ppm(v)), linearity (R-2=0.9604) and short response time (23 s at 83.5 ppm(v)). The water vapor molecules adsorbed onto the MWCNTs/Nafion films showed higher frequency shift than Nafion and single-walled carbon nanotubes/Nafion (SWCNTs/Nafion) films. The adsorption dynamic analysis, molecular mechanics calculation (association constant), was used to elucidate the effect of adding SWCNTs and MWCNTs into Nafion on the increased sensitivity of low humidity sensing. (c) 2005 Elsevier B.V. All rights reserved.
|Appears in Collections:||化學系所|
Show full item record
TAIR Related Article
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.