Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/34408
標題: Effects of acetone on methyl ethyl ketone peroxide runaway reaction
作者: Lin, Y.F.
林彥甫
Tseng, J.M.
Wu, T.C.
Shu, C.M.
關鍵字: runaway reactions;methyl ethyl ketone peroxide (MEKPO);differential;scanning calorimetry (DSC);acetone;kinetic and safety parameters;accelerating rate calorimeter;thermal hazard evaluation;organic;peroxides;decomposition;temperatures;sadt;prediction;substances;kinetics
Project: Journal of Hazardous Materials
期刊/報告no:: Journal of Hazardous Materials, Volume 153, Issue 3, Page(s) 1071-1077.
摘要: 
Runaway reactions by methyl ethyl ketone peroxide (MEKPO) are an important issue in Asia, due to its unstable structure and extensive heat release during upset situations. This study employed differential scanning calorimetry (DSC) to draw the experimental data for MEKPO 31 mass% and with acetone 99 mass% on three types of heating rate of 2, 4, and 10 degrees C/min; the kinetic and safety parameters were then evaluated via curve fitting. Through the reproducible tests in each condition, the results show that acetone is not a contaminant, because it could increase the activation energy (E-a) and onset temperature (T-o) when combined with MEKPO, which differs from the hazard information of the material safety data sheet (MSDS). (C) 2007 Published by Elsevier B.V.
URI: http://hdl.handle.net/11455/34408
ISSN: 0304-3894
DOI: 10.1016/j.jhazmat.2007.09.099
Appears in Collections:化學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.