Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/34703
標題: An electrochemical sensor based on a clay-coated screen-printed electrode for the determination of arbutin
作者: Shih, Y.
曾志明
Zen, J.M.
關鍵字: arbutin;clay;screen-printed electrode;cosmetic bleaching products;carbon electrode;uric-acid
Project: Analytica Chimica Acta
期刊/報告no:: Analytica Chimica Acta, Volume 412, Issue 1-2, Page(s) 63-68.
摘要: 
A preanodized clay-coated screen-printed electrode (CCSPE) is used for the determination of arbutin (hydroquinone-beta-D-glucopyranoside) in cosmetic bleaching products by square-wave voltammetry. The peranodization process exhibits a marked enhancement in the current response of arbutin at the CCSPE. Compared to the performance at a preanodized SPE, the coating of clay was found to further improve the sensitivity and reproducibility. Under optimized conditions, the linear range for arbutin detection is up to 90 mu M (correlation coefficient=0.999) in pH 10.0 ammonium buffer with a detection limit of 0.18 mu M (S/N=3). The electrode can be either disposable or reused since renewal provides good reproducible surfaces. Quantitative analysis was performed by standard addition for the arbutin content in commercial available cosmetic bleaching products. (C) 2000 Elsevier Science B.V. All rights reserved.
URI: http://hdl.handle.net/11455/34703
ISSN: 0003-2670
DOI: 10.1016/s0003-2670(00)00725-x
Appears in Collections:化學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.