Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/34707
標題: Determination of lead(II) on a copper/mercury-plated screen-printed electrode
作者: Zen, J.M.
曾志明
Chung, H.H.
Kumar, A.S.
關鍵字: lead(II);screen-printed electrode;square-wave voltammetry;anodic-stripping voltammetry;film electrode;biosensors;sensors
Project: Analytica Chimica Acta
期刊/報告no:: Analytica Chimica Acta, Volume 421, Issue 2, Page(s) 189-197.
摘要: 
A Cu/Hg-plated screen-printed electrode (CMSPE) was developed for trace Pb(ll) determination by square-wave anodic stripping voltammetry. The intermetallic property of lead with copper in mercury was utilized to increase the sensitivity of Pb(II) detection. The calculated transfer coefficient value for the Pb(II)/Pb redox process on the CMSPE is similar to 0.5 representing the ideality of the system for Pb(II) detection. Systematic investigations were made to optimize the Cu-Hg plating condition on SPE towards the Pb(II) signals in terms of Cu/Hg ratio, plating potential, and plating time. The optimum conditions for electrochemical and square-wave parameters were also evaluated. The calibration curve was linear in the range of 0-100 ppb Pb(II) with a detection limit of 0.81 ppb (S/N = 3) for 60 s preconcentration time. The analytical utility of the CMPSE was demonstrated by applying to various water samples. (C) 2000 Elsevier Science B.V. All rights reserved.
URI: http://hdl.handle.net/11455/34707
ISSN: 0003-2670
DOI: 10.1016/s0003-2670(00)01052-7
Appears in Collections:化學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.