Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/34796
標題: Flow injection analysis of ultratrace sulfide at low potentials on screen-printed carbon electrode modified with cinder/hexacyano cobaltate hybrid
作者: Zen, J.M.
曾志明
Chen, P.Y.
Kumar, A.S.
關鍵字: sulfide;hexacyano cobaltate;cinder;screen-printed electrode;hydrogen-sulfide;capillary-electrophoresis;ion chromatography;sulfur;blue;matrices;sensor;waters;gas;h2s
Project: Electroanalysis
期刊/報告no:: Electroanalysis, Volume 14, Issue 7-8, Page(s) 513-518.
摘要: 
Flow injection analysis (FIA) of ultratrace sulfide has been demonstrated on a screen-printed carbon electrode modified with industrially waste cinder/hexacyano cobaltate (CoHc) hybrid (designated as cinder/CoHcSPE) in pH 2 NH4Cl (0.1 M)/HCl solution at 0 mV (vs. Ag/AgCl). Hybridization of CoHc was achieved through bimetallic formation of Fe-III[Co-III(CN)(6)] in the *Fe-III[Co-III(CN)(6)] in the *Fe-enriched industrially waster cinder modifier. Possible mediated electrocatalytic oxidation of sulfide by higher oxidation state of Co in the hybrid-bimetallic complex is proposed for the system. Under the optimized conditions, the calibration plot is linear up to 2.08 muM with slope, regression coefficient, and detection limit (S/N=3) of 6.19 A/muM, 0.9985, and 12 nM, respectively. Interferences by direct electrochemical oxidation of easily oxidizable substances can be prevented due to the low detecting potential of the working system.
URI: http://hdl.handle.net/11455/34796
ISSN: 1040-0397
DOI: 3.0.co;2-3>10.1002/1521-4109(200204)14:7/8<513::aid-elan513>3.0.co;2-3
Appears in Collections:化學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.