Please use this identifier to cite or link to this item:
|標題:||Poly(4-vinylpyridine)-coated chemically modified electrode for the detection of uric acid in the presence of a high concentration of ascorbic acid||作者:||Zen, J.M.
|關鍵字:||uric acid;poly(4-vinylpyridine);chemically modified electrode;square;wave voltammetry;voltammetric stripping analysis;carbon-paste electrode;film electrode;sensor;urate||Project:||Electroanalysis||期刊/報告no：:||Electroanalysis, Volume 9, Issue 13, Page(s) 1009-1013.||摘要:||
A poly(4-vinylpyridine)-coated carbon paste electrode (PVP/CPE) was developed for the selective determination of uric acid (UA) in the presence of ascorbic acid (AA) by square wave voltammetry. The oxidation of UA at carbon-based electrodes in acidic solutions suffers from interference from AA which can be oxidized at a potential close to that of UA. Due to the very distinct ability of AA and UA to form hydrogen bonds with PVP, the overlapped oxidation potentials of AA and UA can be separated. Linear calibration plots are obtained over the 0-9 mu M and 10-30 mu M in pH 1.1 buffer solution with slopes (mu A/mu M) and correlation coefficients of 3.6, 0.9992 and 7.5, 0.9989, respectively. The detection limit (3 sigma) is 0.2 mu M. The acceptable tolerance of concentration of AA for the determination of 20 mu M UA is at least as high as 0.1 mM. The practical analytical utility is illustrated by selective measurements of UA in human urine without any preliminary treatment.
|Appears in Collections:||化學系所|
Show full item record
TAIR Related Article
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.