Please use this identifier to cite or link to this item:
|標題:||Flow injection analysis of ascorbic acid based on its thermoelectrochemistry at disposable screen-printed carbon electrodes||作者:||Ke, J.H.
|關鍵字:||screen-printed carbon electrode;thermoelectrochemistry;flow injection;analysis;ascorbic acid;graphite composite electrodes;laser activated voltammetry;paste;electrode;amperometric determination;electrochemical processes;diffusion-coefficients;thermal modulation;hydrogen-peroxide;aqueous-solution;uric-acid||Project:||Sensors and Actuators B-Chemical||期刊/報告no：:||Sensors and Actuators B-Chemical, Volume 130, Issue 2, Page(s) 614-619.||摘要:||
The thermoelectrochemistry of ascorbic acid (AA) at a disposable screen-printed carbon electrode (SPE) was studied in this paper. The response of AA is greatly suppressed at higher temperatures when the electrolyte solution containing AA is directly heated. On the other hand, as a light beam is applied to heat an SPE, it is interesting that the heated electrode is capable of increasing the detection sensitivity without decomposing the substrates. It is further applied for flow injection analysis (FIA) of AA by using a specifically designed electrochemical cell coupled with the disposable SPE. Possible reason for the enhancement in oxidation peak intensity at elevated temperature by the proposed heated electrodes operating in a non-isothermal mode is examined through in situ impedance technique as well as diffusion coefficient measurement by cyclic voltammetry. The slope of calibration plot obtained at elevated temperature (similar to 46 degrees C ) is 0.034 mu A/mu M, which is similar to 1.5 times improved than that at room temperature. Applicability in real sample shows in good agreement with the quoted value as well as the results observed by other methods. (c) 2007 Elsevier B.V. All rights reserved.
|Appears in Collections:||化學系所|
Show full item record
TAIR Related Article
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.