Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/34901
標題: Screen printed carbon electrode modified with poly(L-lactide) stabilized gold nanoparticles for sensitive As(III) detection
作者: Song, Y.S.
曾志明
Muthuraman, G.
Chen, Y.Z.
Lin, C.C.
Zen, J.M.
林助傑
關鍵字: As(III);electroanalysis;poly(L-lactide);gold nanoparticle;screen;printed electrode;anodic-stripping voltammetry;differential-pulse polarography;plasma-mass spectrometry;drinking-water;trace amounts;arsenic(iii);taiwan;film
Project: Electroanalysis
期刊/報告no:: Electroanalysis, Volume 18, Issue 18, Page(s) 1763-1770.
摘要: 
Poly(L-lactide) stabilized gold nanoparticles (designated as PLA-Au-NP) with an average particle size of ca. 10 nm were used to modify a disposable screen-printed carbon electrode (SPE) for the detection of As(III) by differential pulse anodic stripping voltammetry. Gold modification was evaluated by cyclic voltammetry, whereas scanning electron microscopy and transmission electron microscopy revealed the size and distribution of gold nanoparticles. The PLA-Au-NP/SPE was applied effectively to detect toxic As(III) in HCl medium. Under the optimal experimental conditions, a linear calibration curve up to 4 ppm with a detection limit (S/N= 3) of 0.09 ppb was obtained. ne sensitivity was good enough to detect As(III) at levels lower than the current EPA standard (10ppb). Most importantly, the PLA-AU(NP)/SPE can be tolerable from the interference of Cu, Cd, Fe, Zn, Mn, and Ni and hence provides a direct and selective detection method for As(III) in natural waters. Practical utility of the PLA-AU(NP)/SPE was demonstrated to detect As(III) in "Blackfoot" disease endemic village groundwater from southwestern coast area of Taiwan (Pei-Men).
URI: http://hdl.handle.net/11455/34901
ISSN: 1040-0397
DOI: 10.1002/elan.200603634
Appears in Collections:化學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.