Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/41062
標題: A current-induced localized heating technique for fabrication of carbon nanomaterials
作者: Lin, Y.W.
陳志銘
Shih, P.Y.
Chen, C.M.
關鍵字: Carbon;Copper;Nanomaterials;catalytic decomposition;nanofibers;nanotubes;growth;cobalt
Project: Journal of Alloys and Compounds
期刊/報告no:: Journal of Alloys and Compounds, Volume 492, Issue 1-2, Page(s) 521-524.
摘要: 
A commercial copper clad laminate was used to fabricate the carbon nanomaterials using a localized heating technique. The surface Cu layer was patterned to a Cu trace and served as a localized heating source as it was current-stressed. Thermal decomposition of phenol formaldehyde, which was the primary constituent of the bottom paper phenolic board, took place primarily near the Cu trace and the carbon nanomaterials were formed directly on the board. The products contain carbon nanosheets and tubular carbon nanofibers. (C) 2009 Elsevier B.V. All rights reserved.
URI: http://hdl.handle.net/11455/41062
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2009.11.156
Appears in Collections:化學工程學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.