Please use this identifier to cite or link to this item:
標題: Numerical investigation on hot metal flow in blast furnace hearth through CFD
作者: Huang, C.E.
Du, S.W.
Cheng, W.T.
關鍵字: hot metal flow;blast furnace hearth;computational fluid dynamics;heat-transfer;iron flow;coke
Project: Isij International
期刊/報告no:: Isij International, Volume 48, Issue 9, Page(s) 1182-1187.
The behavior of hot metal flow in the hearth of a blast furnace is always considered as one of the key factors for determining blast furnace campaign life. To provide a useful insight into the hearth of No. 2 blast furnace at China Steel Corporation (CSC), a numerical model has been developed to analyze the flow and heat transfer under various cooling and operational conditions. The model solves three-dimensional Navier-Stoke equations with conjugate heat transfer and Darcy's law for hot metal flowing through the deadman with porous structure by computational fluid dynamics (CFD). The calculated results indicate that the circulatory hot metal is enhanced when the deadman becomes sitting with gutter coke-free space. As a result, the temperature at the hearth corner increases. This suggests the existence of gutter coke-free space may cause elephant foot type erosion. With drainage of hot metal, the heat flux of taphole significantly increases. For the sake of safety, it may be needed to individually monitor the cooling water temperature flowing through the copper staves, as well as to install thermocouples around the tapholes. The prediction shows that the heat flux of the hearth is insensitive to the temperature of cooling water before the refractories are eroded. It implies that the performance of the water chiller may be limited in the beginning of the blast furnace campaign.
ISSN: 0915-1559
DOI: 10.2355/isijinternational.48.1182
Appears in Collections:化學工程學系所

Show full item record

Google ScholarTM




Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.