Please use this identifier to cite or link to this item:
標題: 流體驅動之壓電式能量產生器
Piezoeletric energy harvesting from fluid induced vibration
作者: 柯宏樺
Ko, Hong-Hua
關鍵字: piezoelectric energy harvester;壓電發電器;PVDF;vibration;PVDF;振動
出版社: 精密工程學系所
引用: 廖偉翔,2007,壓電換能器於低頻發電應用之設計與分析,成功大學,碩士論文。 王泰然,2006,壓電振動平板的能量收集與轉換,大葉大學,碩士論文。 鄭世裕,2008年11月20日,壓電材料之發電器應用,材料世界網。 黃清弘,2005,PVDF,壓電陣列感測器之製作、校正及應用,成功大學,碩士論文。 林盈旭,2003年6月,"壓電式振動微發電機之設計與製作",碩士論文,國立中興大學機械工程研究所。 王柏村,1996年,"振動學",全華科技圖書股份有限公司。 E.O. Torresl and G.A. Rincon-Mora,“Long-Lasting,Self-Sustaining,and Energy-Harvesting System-in-Package (SIP) Wireless Micro-Sensor Solution, ” International Conference on Energy, Environment and Energy-Harvesting Disasters (INCEED 2005), Charlotte, North Carolina, USA, 2005. J. Kymissis, C. Kendall, J. Paradiso and N. Gershenfeld, “Parasitic Power Harvesting in Shoes, ” the Second IEEE International Conference on Wearable Computingt, 1998. N.S. Shenck, “A Demonstration of Useful Electric Energy Generation from Piezoceramics in a Shoe, ” the Department of Electrical Engineering and Computer Science in Partial Fulfillment of the Requirements for the Degree of Master of Science at the MIT, 1999. G.W. Taylor, J.R. Burns and S.M. Kammann, W. B. Powers, and T. R.Welsh, “The Energy Harvesting Eel: A Small Subsurface Ocean/River Power Generator,” IEEE Journal of Oceanic Engineering, Vol.26, No.4,2001. S. Priya, C.T. Chen, D. Fye and J. Zahnd, “Piezoelectric Windmill: A Novel Solution to Remote Sensing,” Japanese Journal of Applied Physics, Vol.44, No.3, pp.104-107, 2005. K.-T. Chang, and M. Ouyang, “Rotary ultrasonic motor driven by a disk-shaped ultrasonic actuator,” IEEE Transactions on Industrial Electronics, Vol. 53, 2006,pp. 831 - 837. T. Kaneko, T. Ohmi, N. Ohya, N. Kawahara, and T. Hattori, “A new, compact and quick-response dynamic focusing lens,” Proceedings of International Conference on Solid State Sensors and Actuators, Vol. 1, 1997, pp. 63 – 66. A. Bergander, W. Driesen, T. Varidel, and J. -M. Breguet, “Monolithic piezoelectric push-pull actuators for inertial drives,” Proceedings of International Symposium on Micromechatronics and Human Science, 2003, pp. 309 - 316. O.-D. Kwon, J.-S. Yoo, Y.-J. Yun, J.-S. Lee, S.-H. Kang, and K.-J. Lim, “A research on the piezoelectric vibration actuator for mobile phone,” Proceedings of nternational Symposium on Electrical Insulating Materials, Vol. 3, 2005, pp. 676 - 678. Jr. E. S. Kolesar, and C. S. Dyson, “Object imaging with a piezoelectric robotic tactile sensor,” Journal of Microelectromechanical Systems, Vol. 4, 1995, pp. 87- 96. J. Cai, H. Wang, S. Wang, X. Wu, T. Ren, and S. Jia, “A study on packaging of PZT MEMS microphone,” Proceedings of the 55th Electronic Components and Technology Conference, Vol. 2, 2005, pp. 1077 - 1080. C. Ravariu, F. Ravariu, A. Rusu, D. Dobrescu, L. Dobrescu, C. Popa, and I. Chiran, “A new job for the pseudo-MOS transistor: working in the pressure sensors field,” Proceedings of the 9th International Conference on Electronics, Circuits and Systems, Vol. 1, 2002, pp. 215 - 218. J. H. Hu, H. L. Li, H. L. W. Chan, and C. L. Choy, “A ring-shaped piezoelectric transformer operating in the third symmetric extensional vibration mode,”Sensors and Actuators A: Physical, Vol. 88, 2001, pp. 79 - 86. H. L. Li, J. H. Hu, and H. L. W. Chain, “Finite element analysis on piezoelectric ring transformer,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 2, 2002, pp. 1177 - 1180. J.-S. Lee, Y.-H. Lee, H.-I. Chai, M.-S. Yoon, and K.-J. Lim, “The characteristics of new piezoelectric ballast for fluorescent T8 lamp,” Proceedings of IEEE International Symposium on Industrial Electronics, Vol. 2, 2001, pp. 947 - 951. B. Koc, S. Alkoy, and K. Uchino, “A circular piezoelectric transformer with crescent shape input electrodes,” Proceedings of IEEE Ultrasonics Symposium,Vol. 2, 1999, pp. 931 - 934. Umeda, M., Nakamura, K. And Ueha, S., 1996,『Analysis of the transformation Of mechanical impact energy to electrical energy using a piezoelectric vibrator』, Japanese Journal Of Applied Physics, Vol. 35, Part 1, No. 5b, May, pp. 3267-3273. Starner, T., 1996, 〝Human-Powered Wearable Computing〞,IBM Systems Journal, Vol. 35, No 3-4, pp. 618-629. Kymissis, J., Kendall, C., Paradiso, J., Gershenfeld, N., 1998,〝Parasitic Power Harvesting in Shoes 〞, Second IEEE International Conference on Wearable Computing, pp.132-139. Clark, W. And Ramsay, M. J., 2000, 〝Smart Material Transducers as Power Sources for Mems Devices 〞,International Symposium on Smart Structures And Microsystems, Hong Kong. Ramsay, Michael J. And Clark, William W., 2001,〝Piezoelectric Energy Harvesting For Biomems Application〞,Proceedings of SPIE, Vol.4332, pp. 429-438. Gonzalez, J. L., Moll, F., And Rubio, A., 2001, 〝A Prospect On the use of Piezoelectric Effect to Supply Power to Wearable Electronic Devices〞, Icmr 2001, Akita, Japan, pp. 202-207. Ottman, Geffrey K., Hofmann, Heath F., And Lesieutre, George A., 2003, Optimized Piezoelectric Energy Harvesting Circuit Using Step-Down Converter In iscontinuous Conduction Mode〞, IEEE Transactions On Power Electronics,Vol. 18, No. 2, pp.696-703. Onoda, Junjiro; Makihara, Kanjuro And Minesugi, Kenji,2003, 〝Energy-Recycling Semi-Active Method for Vibration Suppression with Piezoelectric Transducer〞,AIAA Paper, 2003-1869. Lesieutre, G. A., Ottman, G K. and Hofmann ,H. F., 2004,〝Damping As A Result Of Piezoelectric Energy Harvesting〞,Journal Of Sound And Vibration, 269, p.991-1001. Lefeure, E., Badel, A., Richard, C. And Guyomar, D., 2004,〝High Performance Piezoelectric Vibration Energy Reclamation,” Proceedings of SPIE〞, Vol. 5390, p.379-387. R.W. Fox, S.J. Kline ,”Flow Regime Data and Design Methods for Curved Subsonic Diffusers” Journal of Basic Engineering,Vol.84, pp. 303-312, 1962. A. D. Nashif, D.I.G. Jones and J. P. Henderson, "Vibration Damping",A Wiley-Interscience Publication,pp.117-154,1985.

A piezoelectric energy harvesting from fluid induced vibration is investigated in this research. One of the applications for this energy harvester is used to harvest energy from the water flow in fish bowls. The energy harvester can generate voltage through vibration of a PVDF film.
A commercial finite element analysis software, ABAQUS 6.4, is used to investigate the induced voltage from the PVDF film. A PDMS molding process is used to fabricate the fluidic chamber. The vibration amplitude of the diaphragm is measured by a fiber optic sensor(D6 Philtec)and the generated voltage from the PVDF film is measured by using a digitizer NI PCI-5114 (National Instruments). A force gauge is used to record the displacement of the diaphragm and a pressure sensor is used to measure the fluid pressure in the chamber. The experimental results are compared with the FEM analysis.
其他識別: U0005-2108200910135200
Appears in Collections:精密工程研究所

Show full item record

Google ScholarTM


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.