Please use this identifier to cite or link to this item:
標題: 雷射修補設備之線性能量控制與模組段亮點暗化修補研究
Linear energy control and TFT-LCD bright pixel repair for laser repair equipment
作者: 陳明豐
Chen, Ming-Feng
關鍵字: non-linear energy;非線性能量;linear energy compensation;bright pixel repair;線性能量補償;亮點修補
出版社: 精密工程學系所
引用: [1]戴亞翔,TFT-LCD面版的驅動與設計,五南圖書,2006. [2]顧鴻壽,周本達,光電平面顯示器基本概論,高立圖書,2003. [3]陳連春編譯,彩色液晶顯示器原理技術,建宏出版社,1998. [4]岩井善宏、越石鍵司,平面顯示器的關鍵元件材料技術,全華科技圖書,2004. [5]友達光電, [6]瑞儀光電, [7]黃漢邦, ”平面顯示器檢測技術及設備講義”,2005. [8]台灣凸版, [9] S.P.Baker,Y.C.Joo,M.P.Knaufl,E.Arzt,”Electromigration Damage in Mechanically Deformed Al Conductor Lines:Dislocations as Fast Diffusion Paths”,Acta Materialia, Vol. 48, p2199-2208 ,2000. [10] M.Hasunuma, H.Toyoda and H. Kaneko, “Electromigration Induced Aluminum Atom Migration Retarding by Grain Boundary Structure Stabilization and Copper Doping” ,Microelectronic Reliability,Vol.39, p1631-1645 ,1999. [11] E.G.Colgan and K.P.Rodbell,”The Role of Cu Distribution and Al2Cu Precipitation on the Electromigration Reliability of Submicrometer Al(Cu) line”,Journal of Application Physics Vol.75,No.7, p3423-3434 1994. [12]S. P. Murarka and Rl J . Gutmann, “Advanced Multilayer Metallization Schemes With Copper as Inter Connection Metal”,Thin Solid Films,Vol 236, p257-266 ,1993. [13] C.Jeong,Y.Jinwoo,P.G.Poo“A Defect Inspection Method for TFT Panel Using the Compute Unified Device Architecture (CUDA)”, Industrial Electronics, 2009. ISIE 2009. IEEE International Symposium on, p779-782,2009. [14] W.C.Lee,J.B.Song,B.Y.Kim,S.H.Park,S.M.Lim,W.J.Lee "Auto Defect Repair Algorithm For LCD Panel Review & Repair Machine", SICE Annual Conference, p2200-2203,2008. [15]張頌榮,“TFT-LCD面板之點線瑕疵自動化檢測系統”,國立成功大學製造工程研究所,2005。 [16]旭東機械工業, [17]j.Lee,J.Ehrmann,D.Smart,J.Griffiths,J.Bernstein, "Analyzing the Process Window for Laser Copper-link Processing", Solid State Technology, p63-66,2002. [18] J.B.Bernstein,J.Lee,G.Yang,T.Dahmas,“Analysis of Laser Metal-cut Energy Process Window”, IEEE Semicondut. Manufact.,Vol. 13, No. 2, p228-234,2000. [19] K.J.Chung," Microbridge Formation for Low Resistance Interline Connection Using Pulsed Laser Techniques",Doctor of Philosophy,2005. [20] G. Chryssolouris,"Laser Machining—Theory and Practice", Mechanical Engineering Series, Springer-Verlag, New York Inc., NewYork,1991. [21] J.D.Majumdar,I.Manna,“Laser Processing of Materials”, Sadhana 28(3–4), p495–562,2003. [22] T.Norikazu,Y.Shigenori,H.Masao,"Present and Future of Lasers for Fine Cutting of Metal Plate", Journal of Materials Processing Technology 62,p309–314,1996. [23] C.H.Li,M.J.Tsai,R.Chen,C.H.Lee,S.W.Hong,“Cutting for QFN Packaging by Diode Pumping Solid State Laser System”, Proceedings of IEEE Workshop on Semiconductor Manufacturing Technology, p123–126,2004. [24] C.H.Li,M.J.Tsai,S.M.Yao,“ Cutting Quality Study for QFN Packages by Nd:YAG Laser”, Proceedings of the IEEE International conference on Mechatronics ,ICM’05, p19–24,2005. [25] C.H.Li, M.J.Tsai, C.D.Yang,“Study of Optimal Laser Parameters for Cutting QFN Packages by Taguchi’s Matrix Method”, Optics and Laser Technology Vol 39, p786–795,2007. [26] J.K.S.Sundar,S.V.Joshi,“ Laser Cutting of Materials, Centre for Laser Processing of Materials”, International Advance Research Centre for Powder Metallurgy and New Materials, Hyderabad. [27] A.K.Dubey ,V.Yadava,“Laser Beam Machining—A review”, International Journal of Machine Tools and Manufacture , Vol 48, Issue 6, p609-628,2008 [28] 呂育廷、葉昭永、蔡宗立、周政賓,超快雷射應用在ITO薄膜的圖案製作”,台灣雷射科技應用協會季刊, VOL.8,2009. [29] D.K.Y. Low,L.Li,P.J.Byrd,“ The Influence of Temporal Pulse Train Modulation During Laser Percussion Drilling”, Optics and Lasers in Engineering Vol 35, p149-164,2001. [30] 張金龍, 梁智創, 蕭博全, ”Nd:YAG 雷射於常用金屬材料鑽孔之數值模擬分析, ” 中國機械工程學會第二十三屆全國學術研討會,A8-052,P1-6,2006. [31] HOYA CANDEO OPTRONICS Inc, , [32] 台灣三豐儀器股份有限公司, [33] COHERENT Inc, ,
實驗中以軟體線性補償機制可運用於無硬體補償機制之雷射設備,使用軟體線性補償機制之雷射能量控制方法,在補償後能量之線性比率R square 為0.9989可提高雷射加工能量穩定度控制;以面板亮點修補設計加工最佳成功率為80%,在異常面板修補方法中減少模組拆卸的步驟,使雷射修補產能達到最佳的產出。

Laser drilling is energy dependent and linear proportion to the thickness of the materials. Therefore, a linear laser power supplier will be convenient applying in extensive aperture processes. However, practically, the energy output of laser equipments is non-linear. To obtain a linear energy output, laser power meter is utilized for energy compensation, but the application of laser power meter requires ceasing the operation of laser equipment.
In this thesis, a linear energy compensation method was investigated and designed by using a measurement of laser energy output that provides a stable linear energy laser for processes. In the method, the laser energy testing only requires a fixed time for measuring laser energy and changing laser energy compensate table. Furthermore, the laser equipment doses not need stop during the laser power meter calibration.
In the experiments, a software method for linear energy compensation was designed and applied to the laser equipments which have no laser power meter compensation practices. The method could control and compensate laser energy in linear output in which the energy linear proportion reached R square is 0.9989 providing a stable power source. When using this laser method in the panel design processes, the successes rate reached 80% in performing the bright pixel repair. In panel defect repair, it could prevent taking the case apart from module and fabricate that increases the efficiency in production.
其他識別: U0005-1208201011401300
Appears in Collections:精密工程研究所

Show full item record
TAIR Related Article

Google ScholarTM


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.