Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/43334
標題: Characteristics of multi-element alloy cladding produced by TIG process
作者: Chen, J.H.
吳威德
Hua, P.H.
Chen, P.N.
Chang, C.M.
Chen, M.C.
Wu, W.T.
關鍵字: TIG process;multi-element alloy;microstructure;hardness;high-entropy alloys;wear-resistance;microstructure;elements
Project: Materials Letters
期刊/報告no:: Materials Letters, Volume 62, Issue 15, Page(s) 2490-2492.
摘要: 
A multi-element alloy cladding was fabricated on low carbon steel by the TIG (tungsten inert gas) process using a multi-element alloy filler, The microstructure, crystal structure, and microhardness were evaluated using an SEM (scanning electron microscope), XRD (X-ray diffraction), EDS (energy dispersive X-ray analysis), and a microhardness tester. The wear resistance was also tested. A molybdenum-rich phase with a tetragonal structure and an Fe-rich phase with a body-centered cubic structure were obtained for the single layer cladding and double layer cladding of the alloy filler, respectively. The microhardness of the double layer (Hv 800) was greater than that of the single layer (Hv 500) due to the considerable increase in the molybdenum-rich phase. The cladding layer exhibited an excellent solution strength mechanism, and the wear resistance of the cladding was distinctly enhanced. (C) 2007 Elsevier B.V. All rights reserved.
URI: http://hdl.handle.net/11455/43334
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2007.12.038
Appears in Collections:材料科學與工程學系

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.