Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/43881
標題: Investigation of Light Extraction of InGaN LEDs With Surface-Textured Indium Tin Oxide by Holographic and Natural Lithography
作者: Horng, R.H.
吳宗明
Tsai, Y.L.
Wu, T.M.
Wuu, D.S.
Chao, C.H.
洪瑞華
武東星
關鍵字: Holographic lithography;LED;natural lithography;surface texturing;emitting-diodes;efficiency
Project: Ieee Journal of Selected Topics in Quantum Electronics
期刊/報告no:: Ieee Journal of Selected Topics in Quantum Electronics, Volume 15, Issue 5, Page(s) 1327-1331.
摘要: 
Blue InGaN LEDs with periodically surface-textured indium tin oxide by holographic lithography were compared with those textured randomly by natural lithography where polystyrene spheres (PSs) with required diameter were employed as a mask for dry-etching process. It was found that the employed texturing processes not only exhibit unchanged I-V characteristics but also improve light output power. The turn-ON threshold voltages of all the textured InGaN LEDs are similar to that of a conventional LED chip. An LED textured with a regular pattern with 600 nm pitch exhibits a maximum power enhancement of 65.2% at an injection current of 350 mA as compared with that of an original one. In addition, the LEDs with this 600 nm array pattern present much better light extraction than that textured with equal dimensioned PSs, which is indicative of the superior diffraction-dominated light extraction behavior.
URI: http://hdl.handle.net/11455/43881
ISSN: 1077-260X
DOI: 10.1109/jstqe.2009.2013971
Appears in Collections:材料科學與工程學系

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.