Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/44821
標題: Application of damped-oscillation control signals for wide-band feedback active noise control in acoustic ducts
作者: Lin, J.Y.
林忠逸
Ke, J.H.
關鍵字: damped-oscillation control signals;internal model-based LQG;wide-band;active noise control;acoustic ducts;system;identification;reduction;design
Project: Jsme International Journal Series C-Mechanical Systems Machine Elements and Manufacturing
期刊/報告no:: Jsme International Journal Series C-Mechanical Systems Machine Elements and Manufacturing, Volume 46, Issue 1, Page(s) 168-175.
摘要: 
Multi-damped-oscillation control signals are applied in this study for, active noise control (ANC) in an acoustic duct. Feedback active noise controllers that can generate damped-oscillation control signals are designed by using an internal model-based linear quadratic Gaussian (LQG) design technique. The low and upper bounds containing a desired ANC bandwidth is specified by two frequencies of the control signals. To acquire desired ANC performance, sound pressure attenuation ratios within the bandwidth are tuned by control signals of other frequencies and damping ratios. Computer simulation and experimental results show that sound pressure attenuation ratio of less than or equal to0.3 and less than or equal to0.5, respectively, can be achieved in a wide-band of 100 Hz by using 3 damped-oscillation control signals. Experimental results also show effective noise reduction for time varying disturbance and band.-limited white noise within the ANC bandwidth. These results support the feasibility of the designed controllers with damped-oscillation control signals for wide-band feedback active noise control in acoustic ducts.
URI: http://hdl.handle.net/11455/44821
ISSN: 1344-7653
DOI: 10.1299/jsmec.46.168
Appears in Collections:機械工程學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.