Please use this identifier to cite or link to this item:
|標題:||Experimental investigation of a parallel vortex-plate interaction||作者:||Chen, J.M.
|關鍵字:||numerical-simulation;separation bubble;edge interaction;leading-edge;low-speed;airfoil;vortices;wake||Project:||Journal of Fluids and Structures||期刊/報告no：:||Journal of Fluids and Structures, Volume 12, Issue 3, Page(s) 295-+.||摘要:||
The interaction of a spanwise vortex with a flat plate was investigated experimentally in a wind tunnel. The vortex was produced by a vortex generator airfoil pitching in a tailored nonsinusoidal schedule. The smoke-wire visualization technique and unsteady surface pressure measurements were used to examine the interaction for plates having different leading-edge configurations. The results focus on transient variations of the flow structure and pressure distribution over the plate with the vortex position during the interaction. In comparison with the sharp and elliptical leading-edge plates, it was found that the passage of the vortex has a much stronger effect on the amplitude of unsteady loading for the plate with a square leading edge, primarily due to the deformation of the leading-edge separation bubble. For the examined range of vertical separation distance between the incident vortex and the test plate, it was also found that the amplitude of plate lift variation during the interaction decreases approximately linearly with the separation distance. (C) 1998 Academic Press Limited.
|Appears in Collections:||機械工程學系所|
Show full item record
TAIR Related Article
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.