Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/44932
標題: Wear patterns of, and wear volume formulae for, cylindrically elongated acetabular cup liners
作者: Wu, J.S.S.
鄔詩賢
Hsu, S.L.
Chen, J.H.
關鍵字: Indentation;Wear;Volume;UHMWPE;Total hip replacement;total hip-arthroplasty;polyethylene wear;follow-up;femoral heads;replacement;osteolysis;simulator;microseparation;association;generation
Project: Medical & Biological Engineering & Computing
期刊/報告no:: Medical & Biological Engineering & Computing, Volume 48, Issue 7, Page(s) 691-701.
摘要: 
This study analyzed the wear patterns of, and wear volume formulae for, cylindrically elongated acetabular cup liners. The geometric patterns of the wear surface were first classified, then wear volume formulae were derived by integral calculus. SolidWorks(A (R)) software or published formulae were used to verify the accuracy of the proposed formulae. The analytical results showed that the wear shape of the liner can be categorized into seven wear patterns, including the special case of wear at 90A degrees, and the seven corresponding wear formulae were derived. In addition, wear of the cylindrical elongation might add considerably to the volume loss of the liner, depending on the height and shape of the elongation and the depth and direction of the linear penetration, being maximally 21% in the investigated model. The proposed wear formulae and patterns will be useful for more accurate performance evaluation of existing hip components implanted in patients and for the designing of new hip components.
URI: http://hdl.handle.net/11455/44932
ISSN: 0140-0118
DOI: 10.1007/s11517-010-0613-2
Appears in Collections:機械工程學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.