Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/44939
標題: Wear patterns of, and wear volume formulae for, hemispherical acetabular cup liners
作者: Wu, J.S.S.
鄔詩賢
Hsu, S.L.
Chen, J.H.
關鍵字: UHMWPE wear;Wear formulae;Wear volume;Wear pattern;Total hip;replacement;Surface topography;total hip-arthroplasty;molecular-weight polyethylene;in-vivo;determination;mechanical-properties;replacement;osteolysis;components;simulator;creep;revision
Project: Wear
期刊/報告no:: Wear, Volume 268, Issue 3-4, Page(s) 481-487.
摘要: 
This study analyzed wear patterns of, and wear volume formulae for, hemispherical acetabular cup liners used in total hip replacement. The geometric patterns of the wear surface were first classified, then wear volume formulae were derived by integral calculus. Based on the theoretical maximal and minimal wear volumes, three-dimensional wear models constructed using SolidWorks(R) software or published formulae were used to verify the accuracy of the formulae proposed in this study. Analytical results showed that, with the exception of the pattern of a wear angle of 90 degrees, hemispherical liner wear can be divided into two patterns. Once the wear pattern is determined from the wear angle and depth, a wear formula is applied to calculate the wear volume. The formulae and wear patterns described herein are crucial for more accurate performance evaluation of existing hip components implanted in patients, as well as for designing new hip components. (C) 2009 Elsevier B.V. All rights reserved.
URI: http://hdl.handle.net/11455/44939
ISSN: 0043-1648
DOI: 10.1016/j.wear.2009.09.007
Appears in Collections:機械工程學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.