Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/44947
標題: Complementary metal-oxide-semiconductor microelectromechanical pressure sensor integrated with circuits on chip
作者: Dai, C.L.
戴慶良
Liu, M.C.
關鍵字: pressure sensor;circuits;post-process;biomedical applications;cmos process;fabrication;si
Project: Japanese Journal of Applied Physics Part 1-Regular Papers Brief Communications & Review Papers
期刊/報告no:: Japanese Journal of Applied Physics Part 1-Regular Papers Brief Communications & Review Papers, Volume 46, Issue 2, Page(s) 843-848.
摘要: 
This study investigates the fabrication of an integrated pressure sensor using the commercial 0.35 mu m complementary metaloxide-semiconductor (CMOS) process and a post-process. The main character of the pressure sensor is to integrate the circuits on a chip. The pressure sensor that is a capacitive type sensor is composed of 128 sensing cells in parallel, and each sensing cell contains a suspended membrane and a fixed electrode to form a parallel-plate sensing capacitor. The circuits are employed to convert the capacitance variation of the pressure sensor into the output voltage. The post-process uses etchants to etch the sacrificial layers to release the suspended membrane of the pressure sensor, and then low pressure chemical vapor deposition (LPCVD) parylene is utilized to seal the etching holes of the pressure sensor. Experimental results show that the pressure sensor has a sensitivity of 1.5 mV/(V.kPa) in the pressure range of 0-200 kPa.
URI: http://hdl.handle.net/11455/44947
ISSN: 0021-4922
DOI: 10.1143/jjap.46.843
Appears in Collections:機械工程學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.