Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/44981
標題: Low voltage actuated RF micromechanical switches fabricated using CMOS-MEMS technique
作者: Dai, C.L.
戴慶良
Chen, J.H.
關鍵字: micromechanical switches;CMOS;post-process;capacitive switches
Project: Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems
期刊/報告no:: Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, Volume 12, Issue 12, Page(s) 1143-1151.
摘要: 
This study investigates the fabrication of radio frequency (RF) micromechanical switches with low actuation voltage using the commercial 0.35 mu m double polysilicon four metal (DPFM) complementary metal oxide semiconductor (CMOS) process and the post-process. The advantages of RF micromechanical switches include low pull-down voltage and ease of post-processing. Three types of RF micromechanical switches are designed and manufactured. The RF switches are capacitive type, and the structures of the switches comprise coplanar waveguide (CPW) transmission lines, supported springs and a suspended membrane. The post-process requires only a wet etching silicon dioxide layer. Experimental results show that type-c switch needs only a pull-down voltage of 7 V.
URI: http://hdl.handle.net/11455/44981
ISSN: 0946-7076
DOI: 10.1007/s00542-006-0243-7
Appears in Collections:機械工程學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.