Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/45846
標題: Prediction of defluidization time of alkali composition at various operating conditions during incineration
作者: Lin, C.L.
魏銘彥
Wey, M.Y.
Lu, C.Y.
關鍵字: defluidization;agglomeration;incineration;plastic-viscous flow;fluidized-bed combustors;temperature gas fluidization;iron particles;ash behavior;agglomeration;model;destabilization;gasification;pyrolysis;forces
Project: Powder Technology
期刊/報告no:: Powder Technology, Volume 161, Issue 2, Page(s) 150-157.
摘要: 
This investigation presents a simple model to describe defluidization time. It includes such operating parameters as operating temperature, gas velocity and number of bed particles. The proposed model also uses the plastic-viscous flow mechanism and the average convective solids mass flow rate to evaluate the adhesive and segregation forces. Mass and force balance were employed to develop the model. Then, the thickness of the coating layer was calculated by measuring the density of the agglomerate, to elucidate the coating characteristics of eutectics on the particle surface. The resulting predictions were based on a regression of our previous results. Comparing the experimental data with the predicted defluidization time reveals an error of between -20% and +20%, when the proportion of Na in the bed material was between 0.8 and 1. These data represent close agreement. (C) 2005 Elsevier B.V. All rights reserved.
URI: http://hdl.handle.net/11455/45846
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2005.10.010
Appears in Collections:環境工程學系所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.