Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/46380
標題: A new mass spectrometry electrospray tip obtained via precise mechanical micromachining
作者: Chang, Y.Z.
王國禎
Yang, M.W.
Wang, G.J.
關鍵字: mass spectrometry;electrospray tip;precise mechanical micromachining;Taylor cone;electrophoresis;capillary;devices
Project: Analytical and Bioanalytical Chemistry
期刊/報告no:: Analytical and Bioanalytical Chemistry, Volume 383, Issue 1, Page(s) 76-82.
摘要: 
A new electrospray tip incorporating a beveled edge has been designed for use in plastic electrophoresis chip/electrospray mass spectrometry. Theoretical hydrodynamic analysis has been conducted to model the analytical sensitivity of the spray tip shape. A larger sample wall, that provides increased hydraulic pressure, is recommended in order to preserve the fluid stability at the tip outlet. A polymer with better hydrophobic characteristics than glass was used for the spray tip in order to restrict moisture accumulation at the spray tip outlet. Experimental results demonstrate that the analytical sensitivity of the proposed scheme is better than that obtained using the flat-head tip. Although a tapered capillary tip is commonly used in electrophoresis chip/ electrospray mass spectrometry, the proposed tip offers a similar sensitivity while being more rugged and durable than the conventional tapered capillary tip. The cost of our design is also much lower than conventional spray tips.
URI: http://hdl.handle.net/11455/46380
ISSN: 1618-2642
DOI: 10.1007/s00216-005-3376-0
Appears in Collections:生醫工程研究所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.