Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/46435
標題: Controlled porous pattern of anodic aluminum oxide by foils laminate approach
作者: Wang, G.J.
王國禎
Peng, C.S.
關鍵字: anodic aluminum oxide;porous pattern;fabrication;nanopore arrays;carbon nanotubes;fabrication;growth;template;tube
Project: Journal of Nanoscience and Nanotechnology
期刊/報告no:: Journal of Nanoscience and Nanotechnology, Volume 6, Issue 4, Page(s) 1004-1008.
摘要: 
A novel, much simpler, and low-cost method to fabricate the porous pattern of the anodic aluminum oxide (AAO) based on the aluminum foils laminate approach was carried out. During our experiments, it was found that the pores of the AAO on the upper foil grew bi-directionally from both the top and the bottom surfaces. Experimental results further indicate that the upward porous pattern of the upper foil is determined by the surface structure of the bottom surface of the upper foil. The porous pattern of AAO can be controlled by a pre-made pattern on the bottom surface. Furthermore, no Aluminum (Al) layer removing process is required in this novel laminate method.
URI: http://hdl.handle.net/11455/46435
ISSN: 1533-4880
DOI: 10.1166/jnn.2006.148
Appears in Collections:生醫工程研究所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.