Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/46492
標題: Fabrication of crystalline indium tin oxide nanobasket electrodes using aluminum anodic oxide template
作者: Wang, G.J.
楊錫杭
Chen, H.T.
Yang, H.
王國禎
關鍵字: crystalline nanobasket ITO;RF magnetron sputtering;AAO template;thin-films;lithium;nanowires;whiskers;sensor;cells
Project: Japanese Journal of Applied Physics
期刊/報告no:: Japanese Journal of Applied Physics, Volume 47, Issue 7, Page(s) 5727-5729.
摘要: 
Fabrication of crystalline indium tin oxide (ITO) nanobasket electrodes shaped by ail anodic aluminum oxide (AAO) template for better electron conductivity is presented. ITO films were deposited on porous AAO templates by RF magnetron sputtering. The sputter-coated ITO films were characterized by field-emission scanning electron microscopy (FESEM) to illustrate the nanobasket morphologies. The compositions of the ITO films were characterized by energy-dispersive X-ray (EDS) analysis. X-ray diffraction (XRD) analysis was conducted to evaluate the crystallinity. The crystallinity call be enhanced by annealing at 300 degrees C. Although the conductivity of the ITO nanobasket film is larger than that of the conventional ITO thin film, the harvest efficiency can be markedly increased due to the nanobasket structure which enables most of the photoexcited electrons to reach their nearest electrode before losing their momentum. The presented ITO nanobasket films can be further used as a more effective electrode material for photovoltaics such as dye-sensitized solar cells (DSSCs).
URI: http://hdl.handle.net/11455/46492
ISSN: 0021-4922
DOI: 10.1143/jjap.47.5727
Appears in Collections:生醫工程研究所

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.