Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/50229
標題: Effects of adlay species and rice flour ratio on the physicochemical properties and texture characteristic of adlay-based extrudates
作者: Yang, S.H.
彭錦樵
Peng, J.
Lui, W.B.
Lin, J.
關鍵字: single-screw extruder;adlay;rice flour;physicochemical;texture;characteristic;var ma-yuen;extrusion-cooking;food-products;wheat-starch;corn grits;temperature;moisture
Project: Journal of Food Engineering
期刊/報告no:: Journal of Food Engineering, Volume 84, Issue 3, Page(s) 489-494.
摘要: 
The effect of extrusion parameters, including adlay species (Taichung No. 1, Okayama zairai, Hatohikari, Hatomusume) and rice flour levels (0%, 25%, 50%) on the physicochemical properties (bulk density, radial expansion ratio, longitudinal expansion, water absorption index (WAI) and water solubility index (WSI)), and textural characteristic (hardness) of an adlay-based extrudate was investigated. The Hatohikari species had highest radial expansion ratio and longitudinal expansion, but lowest bulk density and hardness. However, the Taichung No. 1 species had lowest radial expansion ratio and longitudinal expansion, but highest bulk density and hardness. The Hatohikari species polished Adlay extrudates had the maximum WSI and minimum WAI However, the Hatomusume species had minimum WSI and maximum WAI The results also indicated that increasing the rice flour level resulted in an increase in extrudates' radial expansion ratio and WAI, however, a decrease in extrudates' longitudinal expansion, bulk density, hardness and WSI. (C) 2007 Elsevier Ltd. All rights reserved.
URI: http://hdl.handle.net/11455/50229
ISSN: 0260-8774
DOI: 10.1016/j.jfoodeng.2007.06.010
Appears in Collections:生物產業機電工程學系

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.