Please use this identifier to cite or link to this item:
DC FieldValueLanguage
dc.contributor.advisorC.C. Mengen_US
dc.contributor.authorSun, PoHsingen_US
dc.description.abstract利用兩種新的幾何參數m¢(or m)及n¢ (or n),可用來分析所有雙埠網路穩定情形,兩者參數之大小可決定在GS (orGL)平面上,穩定圓與單位史密斯圓之間的幾何關係。½m¢½ (or½m½)參數定義為在GS (orGL)平面上,介於穩定圓與單位史密斯圓圓心間之最小距離;而½n¢½ (or½n½)參數定義為在GS (orGL)平面上,介於穩定圓與單位史密斯圓圓心間之最大距離。假如n¢ (or n)>0,則表示穩定圓內部(disk)區域穩定,反之n¢ (or n)<0,則表示穩定圓外部(disk complement)區域穩定。m¢(or m)>0表示穩定區域包含單位史密圓原點,反之m¢(or m)<0則表示單位史密斯圓原點所在的區域不穩定。藉由參數m¢(orm)及n¢ (orn)幾何意義,可分類出12種在GS (orGL)平面上之穩定情況。然而這兩種新的幾何參數m¢(or m)及n¢ (or n)只是理論上推導,因此本篇論文第二章將以實際的雙埠網路來實現這兩種幾何穩定參數所分類之12種不同穩定情況,以驗證兩種幾何推導之穩定性參數。 對於雙埠網路條件式穩定及無條件穩定的增益圖形,在微波放大器設計上是非常重要的。傳統穩定參數K、B-與D-可用來分類出八種不同增益圖形,本篇論文第三章將八種不同增益圖形分別以功率增益對反射係數作圖,藉由圖形之分析可判別主動網路之穩定度與其增益之取捨,這將對於穩定與匹配的權衡有著莫大的助益。zh_TW
dc.description.abstractTwo geometrical stability parameters, m (or m) and n (or n) are used to analyze the stability of a two-port network. The magnitudes of both m (or m) and n (or n) parameters determine the geometrical relations between the SC (Stability Circle) and the USC (Unit Smith Chart) in the GS (or GL) plane. m (orm) parameter is defined as the minimum distance from SC to the origin of USC in the GS (or GL) plane; while n (orn) parameter is defined as the maximum distance from SC to the origin of the USC in the GS (or GL) plane. The sign of n (or n) parameter determines that the region inside SC (disk) is stable if n (or n)> 0 or the region outside SC (disk complement) is stable if n (or n)< 0. The stable region includes the USC origin if m (or m) parameter is positive. Otherwise, the stable region excludes the USC origin when m (or m) parameter is negative. Using the geometrical relations of m (or m) and n (or n) parameters, there are totally twelve situations between the SC and USC in the GS (or GL) plane. However, these two geometrical stability parameters just are a theoretical-derived formulation. Hence, Chapter 2 presents the practical two-port networks to realize twelve classified situations according to two geometrically derived stability parameters (i.e. n and m) in the GS plane. Gain profiles along the line joining the USC center and the SC center for conditionally stable and unconditionally stable amplifiers are important for amplifier design. The SC intersects the USC at two invariant points if |K| <1 or |K| >1 is equivalent to stating that the SC is inside or outside the USC. Stability parameters such as K, B- and D- factors can be used to classify the gain profiles. There are totally eight gain profiles along the line joining the SC center and the USC center for different K, B1 and D1 factors in the GS plane. Chapter 3 will illustrate the corresponding practical available gain circles.en_US
dc.description.tableofcontents中文摘要 i Abstract ii 誌謝 iii Contents iv Figure captions vi Chapter 1 Introduction 1 Chapter 2 Using the Practical Two-Port Networks to Realize Twelve Stability Situations According to Two Geometrically Derived Stability Parameters 5 2.1 Twelve situations in the Source plane 5 2.2 Twelve situations in the Input plane 10 2.3 Relations between the Input plane and Source plane for unconditionally stable case 13 2.4 Generating twelve situations in the Source plane by the practical two-port networks 15 Chapter 3 Eight Gain Profiles for Conditional and Unconditional Stability 31 3.1 Power gain introduction 31 3.2 Background 32 3.3 Illustration of eight gain profiles 35 3.4 Example of eight gain profiles 39 Chapter 4 Discussions and Conclusions 46 References 48 Appendix I 50 Appendix II 53 Appendix III 55 Appendix IV 61zh_TW
dc.titleRealizing twelve stability situations of two-port networks according to two geometrically derived stability parametersen_US
dc.typeThesis and Dissertationzh_TW
item.fulltextno fulltext-
item.openairetypeThesis and Dissertation-
Appears in Collections:電機工程學系所
Show simple item record
TAIR Related Article

Google ScholarTM


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.